22RE TPS Allen Bolt Upgrade Kit
One challenge to adjusting the 22re TPS is that the screws are nearly impossible to access when the unit is in the vehicle. To make the adjustment easier LC Engineering offers a TPS bolt upgrade kit to replace the stock TPS Phillips head screws with allen head bolts and then uses a ball-end allen wrench to loosen and tighten them. The ball headed allen wrench allows you to access the bolts at an angle instead of having to get to them straight on like the stock screws.
This kit will also help if you have damaged the stock screw heads trying to loosen them up. This kit contains two M4-0.7 x 16mm socket head bolts, four M4 flat washers and one 3mm ball head allen wrench. The screw length changed around on the stock applications so we supply you with screws to match the longest stock application and then you can use the supplied washers to shim them as needed for proper length.
This product should not be used in a manner that violates Federal EPA Laws.
Contact our Tech Support Line for further information at 928-855-6341.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.