-
Leaf Spring Frame Tube Jigs Frame Tubes install into IFS style frame for mounting leaf springs. Accepts stock Toyota front bushings. Jigs are used for positioning tubes in frame. This product should not be used in a manner that violates Federal EPA...$52.38 -
Track Bar Axle Mount Leaf springs can "wrap up" under the torque of rock crawling. Low gears and flexible springs are more susceptible to this effect. For most trail rigs, the wrap up does not present a problem. For those tackling the top trails and...$84.71 -
Johnny Joint 1.25" Rod End (Right Threaded) Forged Johnny Joint® rod ends feature forged steel construction, a 1 1/4"-12 right hand threaded shank and come fully assembled with our standard Johnny Joint internals (2.625" wide ball center with a...$82.35 -
Johnny Joint Jam Nut (Right Threaded) These jam nuts are good to have if you spend a lot of time working on your rock crawler suspension. These jam nuts tighten against the rod ends to keep them from loosening. 1 1/4"-12 right hand thread jam nut for...$7.17 -
Leafspring Bumpstops Bump Stops are used to prevent over-flexing of leaf springs and shocks. Bumpstops can be bolted or welded in place. We recommend welding bumpstops to top of the u-bolt flip kit plate. NOTE: Bump Stops are 2" wide by 5 1/4" long...$50.00 -
Leafspring Bumpstops (w/ Extensions) Bumpstops are used to prevent over-flexing of leaf springs and shocks. Bumpstops can be bolted or welded in place. We recommend welding bumpstops to top of the u-bolt flip kit plate. Bumpstops are 2" wide by 5 1/4"...$74.62 -
Leafspring Bumpstop Extensions When installing leaf springs it's important to have bumpstops to limit how far the leaf springs compress. These easy to weld on extensions make installing bumpstops quick and easy. Extensions weld directly to the frame...$39.18 -
Differential Armor (Small Curved) Here is a great way to add some beef to the axle housing and protect your ring gear from trail damage. This weld on plate is curved to fit snugly over the face of your solid axle housing. Made from 1/4" thick plate...$30.97 -
Large Differential Armor In addition to our small style ring gear protector, we also have a larger size for those that prefer something a little bigger to protect their 3rd members. This differential armor welds into place. Kit Includes: (2)...$87.56 -
Upper Gusset (Solid Front Axle) This gusset welds on top of your Toyota front solid axle and helps prevent bending of the axle housing. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for...$48.58 -
Flange Dust Shield Dust shield for use with our triple drilled flange, see Part #: 2053174. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further information at 928-575-2174...$15.94 -
3 Hole Spring Perches When installing lifted rear leaf springs, it's best to rotate the pinion so it points directly at the rear transfer case output flange and use a CV style drive shaft. The best way to rotate the pinion is to cut off the old perches...$59.02
-
fast shipping
Speed Delivery