-
Heat Riser Tubing (1.5" x 36") This heat riser tubing is just what you need if you need to keep the choke plate on your carbureted engine hooked to the exhaust for emissions purposes. This tubing goes from the heat shield on the exhaust manifold to the...$37.20 -
Heat Riser Kit (Attaches Heat Riser To Air Cleaner) This kit is used to connect a heat riser tube to the stock air cleaner assembly. This kit can be used on any header with 1.5" primary tubes. Kit Includes: (3) Hose clamps (1) 1.5″ Standoff (1)...$76.43 -
OEM Bell Housing to Block Bolt Set After many years of sitting in your engine compartment, the bell housing bolts might not be in the best shape, especially if you've had the engine or trans out a few times. Instead of scrambling to replace a bolt or...$23.51 -
Dual Comp Clutch Disc (9 1/4″) Already have an LC Dual Comp clutch kit and just need to replace the disk? Here you go! Just slip one of these in place of your old worn out disk and you will be good to go. This is the replacement disk for all our 9...$205.43 -
Metallic Clutch Disc (9 1/4″) Already have a LC Metallic clutch kit and just need to replace the disk? Here you go! Just slip one of these in place of your old worn out disk and you will be good to go. This is the replacement disk for our 3VZ pro...$210.84 -
Metallic Clutch Kit (9 1/4") All of LC Engineering's clutch kits feature all new components with a single diaphragm H.D. pressure plate. Don't be fooled by fancy spinning gizmos. A diaphragm clutch delivers full holding power at all engine rpm's. For...$479.08 -
Pressure Plate (9 1/4") LC Engineering's pressure plates are a heavy-duty replacement with added holding power for everything from a daily driver to a full race car. These pressure plates will give you a firmer pedal feel without overpowering you or...$205.43 -
Breather Hose (Front Of Valve Cover) OEM Toyota hose comes off the valve cover and goes to intake manifold. OEM Toyota Part #: 12262-35060 NOTE: Not for carbureted applications, for carbureted models, see Part #: 1072413 (1984), or Part #: ...$20.24 -
Hi-Torque Starter Denso Super Class Starter, (Remanufactured) features a housing re-trapped to OEM specifications and damage-checked for heat warping, corrosion or improper surface alignment and refinished, polished gauged and performance tested...$204.58 -
Hi-Torque Starter If your engine starts hard or fails to start, the problem can be in the starter. And to replace your malfunctioning starter, there is no need to search long, just opt for this premium replacement. It was designed to strict OE...$169.89 -
3VZ Hi-Torque Starter Is your 3VZ struggling to start like it use to? Then look no further than our new high torque starters, these new OE starters put out a whopping 1.6 Kw which is a .6 Kw difference over stock and are designed to meet OEM standards...$154.45 -
Cam Degree Kit Cam degreeing can be a scary procedure if you are not prepared for it. LC Engineering has just made it a lot easier by creating a kit that is designed to work on your 20R, 22R/RE/RET engine. This kit will include a complete universal cam...$160.63
-
fast shipping
Speed Delivery