Air Shock Hoop Mounting Kit
Most link kits do not come with upper shock mounts because the exo-cage or tube work varies from truck to truck so much it is hard to determine where shock placement will occur. At Trail-Gear, we understand this issue all too well, so we have developed an Air Shock Hoop Mounting Kit that can be used on almost any truck or buggy to properly mount air shocks. Our kit includes two large hoops that can be coped and welded onto a frame or an exo-cage and one 3' section of tubing that can be cut to size and welded between the two hoops. Once you have done this all that is left is to weld the shock mounts onto the tube in the desired location and you are done.
NOTE: All tubes in this kit are 1035 DOM. Parts are shipped unpainted.
This product should not be used in a manner that violates Federal EPA Laws.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
| Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501. |
by Trail-Gear
- Universal