Mechanical Fuel Pump
The fuel pump is a very important part of your vehicle. If you do not have the proper fuel pressure or volume you can starve the engine and cause major engine damage. The best way to cure this problem is to replace that worn-out fuel pump with a new one. LC Engineering can provide you with a fuel pump for your carbureted 22R engine. This is a direct replacement mechanical pump that will bolt to the cylinder head.
If your engine already has a mechanical fuel pump installed, you will already have this spacer installed. If you are not sure if you have this spacer, check between the fuel pump and the cylinder head. It will be a spacer roughly 1/4" thick. If you are converting a formerly-fuel injected vehicle to carburetion, you will need to purchase a fuel pump drive spacer, see Part #: 1035052.
NOTE: Comes with (2) gaskets but no spacer, which is sold separately on our store (link above). Failure to use the fuel pump spacer will result in fuel pump failure!
| Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501. |
- 1981-1995 22R 2.4L Engines
29 Reviews Hide Reviews Show Reviews
-
22R fuel pump
Quieter than Box store pump. Works perfectly and I no longer have the fuel running back to to tank after it sits!
-
Fuel pump
Top notch quality pump delivered on time
-
Works great
Better quality than a parts store pump
-
It's a fuel pump.
I bought this for a backup when my Napa brand shits the bed
-
Excellent vendor!
Thanks!
-
1983 Toyota truck 4x4
As always, parts and service are the best, thanks again
-
Mechanical Fuel Pump 22R (80-95 Carb. Only)
Excellent
-
Excellent Japan-built fuel pump
I ordered this pump at the recommendation of other reviewers. I wanted a quality pump and not one of those cheap Chinese junk pumps from your local auto parts stores that cost half of these but will clunk out in a few weeks.
-
Jason Boolen give 5 stars
