Street Valve Shim

(Stock Bucket / 2.75mm)

Street valve shims are used to shim the valve lash to obtain the proper valve lash specification that is required for the appropriate camshaft grind. On 2RZ and 3RZ engines, the cam rides directly on the shim on stock buckets. Our street shims drop directly in place in the stock buckets, allowing you to adjust valve clearance properly. After doing this work for a while, you'll accumulate an assortment of shims of different thicknesses. So along with swapping shims from one lifter to another, you'll be able to reset the clearances from your parts stock.

Shim Diameter: 28mm (1.101")

OEM Toyota Part #: 13753-74110

NOTE: Sold individually. For engines using aftermarket buckets, such as our Pro shim-under buckets, you'll need our Pro shims and different retainers.

This product should not be used in a manner that violates Federal EPA Laws.

Contact our Tech Support Line for further information at 928-855-6341.

Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!