1-Bar Map Sensor (No Boost) Map sensors in 3 varieties (1 Bar, 2 Bar, and 3 Bar), and a barometric pressure sensor. 1 Bar Sensors are good for NA engines and measure from 0 (vacuum) to approximately atmospheric pressure. A 2 Bar Sensors is good for up...

Hall Sensor (Replacement) The Hall Sensor mounts on the front cover and uses magnets strategically mounted in the balancer pulley to generate a signal for proper ignition timing. Contact our Tech Support Line for further information at...

Fan Relay Electric fan relay upgrade for Pro Fuel Injection kits. Allows the computer in our Pro Fuel Injection kits to control your electric fan. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...

Air Conditioning / Fast Idle Solenoid This solenoid can be used for one of two options; A/C or Fast Idle. The Fast Idle/ A/C Solenoid does not require an additional valve. The fast idle option consists of extra circuitry added to the ECU, a control...

Air Temp Plate (Adapts Cold Start Injector to Air Temp Sensor) Custom made plate to install an air temperature sensor where the cold start injector normally sits. Contact our Tech Support Line for further information at 928-575-2174...

Fuel Pump Relay Fuel pump Relay for Pro Fuel Injection Kits. Required for the computer to turn on the electric fuel pump. Much easier than having an additional switch on the dashboard! Contact our Tech Support Line for further information at...

Knock Sensor Upgrade This is for the upgrade for the newest Pro Fuel Kits using the SDS computer. The upgrade will come with the Knock Sensor and adapter. Knock control allows the ECU to retard the ignition timing automatically if knocking is detected...

Hall Sensor Mount When installing our LC Pro Fuel Injection System on a 2RZ or 3RZ, this bracket mounts the Hall Effect Sensor perfectly to generate a signal from the crank pulley. Contact our Tech Support Line for further information at...

Crank Trigger Magnet Individual replacement crank position sensor magnets for our Pro Fuel Injection kits. These magnets get installed in the balancer pulley and trigger the hall effect sensor to generate a signal for the ignition system. NOTE: Sold...

Pro Spark Plug Wires (Cut To Length w/ HEI Style Ends) Magnecor's KV85 competition 8.5mm ignition cables features Magnecor's exclusive 2.5mm high-capacity metallic inductance EMI-suppressed conductor consisting of stainless steel wire precisely wound...

Pro Spark Plug Wires (Cut To Length w/ HEI Style Ends) Magnecor's KV85 competition 8.5mm ignition cables features Magnecor's exclusive 2.5mm high-capacity metallic inductance EMI-suppressed conductor consisting of stainless steel wire precisely wound...

Air Temp Sensor (â"¦Å“″ NPT) Air Intake Temperature sensor for use with our Pro Fuel Injection systems. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may...