-
U Bend (6″ Radius) Use these 3" U-Bends for building your own headers or replacing a bent or damaged tube. NOTE: Size listed is the outside diameter. Constructed of mild steel. Contact our Tech Support Line for further information at...$46.85 -
Brake Line Clip This is the OE clip that holds the female side of the brake line into the mounting bracket (sold each). OEM Toyota Part #: 90468-A0007 Contact our Tech Support Line for further information at 928-575-2174. Note: Images...$2.29 -
(1) NGK V-Power Spark Plug LFR7AIX2309 (1 Heat Range Cooler than Stock) NGK iridium plugs represent the ultimate evolution of spark plug technology and performance. The iridium center electrode is both stronger and harder than platinum. This allows NGK...$11.85 -
3mm Allen Wrench (Ball Head) This 3mm allen wrench is used mainly for our TPS screw upgrade kit. The ball end of the wrench allows off angle access to the TPS screws. This makes adjusting the TPS a lot easier if you are doing it in the vehicle. NOTE:...$8.19 -
Fuel Pressure Gauge "T" Fitting (5/16" Hose to 1/8" NPT) This fitting makes installing your fuel pressure gauge much easier. The fitting has an 1/8"npt "T" fitting along with two 5/16" hose barbs. This will allow you to install your fuel pressure...$15.45 -
Front Shock Hoops The Universal Shock Hoop Kit is long enough to accommodate a 14" shock, but not so long that you cannot use a 12" shock. The shock hoops are made out of 1035 DOM and are precision CNC bent to ensure the highest quality product. From...$123.13 -
Residual Valve (2 PSI) When converting your rear drum brakes to disc you will need to hold pressure on the rear line to keep the pads in contact with the rotors. If you don't then you will have to pump your pedal to get a firm brake feel. This residual...$32.39 -
Wastegate Block Off Plate (CNC Turbo Manifold) This block off plate goes under the CNC Turbo manifold (2) Bolt Style. 3/8" thick Ceramic Coated to handle the heat from our CNC turbo manifold. Contact our Tech Support Line for further information...$25.90 -
Garrett T3 Exhaust Discharge Flange (4-Bolt) Use 2.5" OD tubing in the groove or 3" OD tubing outside the groove. 3" OD is tight near the bolt holes but works fine so you're not limited to a 2.5" downpipe. Contact our Tech Support Line for...$24.84 -
Upgrade your FJ Cruiser with the JBA Performance Exhaust System for a powerful sound, increased horsepower, and long-lasting quality. Precision-engineered for the 2007-2012 Toyota FJ Cruiser 4.0L V6, this cat-back system utilizes free-flowing,...$512.55 -
Take your Toyota’s performance to the next level with the JBA Cat4ward Silver Ceramic Header Kit, designed specifically for the 4.0L V6 in Tacoma, FJ Cruiser, and 4Runner models. Precision engineered for direct fitment, these headers are made to...$722.10 -
JBA Header Kit (Stainless Steel) JBA Cat4ward Headers are the perfect upgrade for today's emissions controlled cars, trucks and SUVs. Engineered with heavy-duty features and patented technology, these headers deliver serious performance gains without...$507.05
-
fast shipping
Speed Delivery