Pro Billet Air Cleaner Kit
(Weber Carb)
The Pro Billet Air Cleaner Kit is a bolt-on upgrade for your Weber two-barrel carburetors. With twice the filter area as the stock Weber filter. This air cleaner requires no adapters or modification to bolt directly to you Weber 32/36 or 38 carburetor. The kit also comes with a washable and reusable K&N air filter element with the million-mile limited warranty. A polished Billet top set this filter apart from others. Made in the USA The Billet Air Cleaner looks great and performs just as well as it looks. All LC Weber downdraft Carb Kits can be upgraded to use the Pro Billet Air Cleaner.
NOTE: Will not fit pre 85 trucks unless the vehicle has a body lift.
| Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501. |
- Weber two-barrel carburetors
To open a printable PDF version of this instruction CLICK HERE
Kit Includes:
- (1) Air Cleaner Bottom
- (1) Nylon Pipe Plug
- (4) M5 x 25mm Allen Bolt
- (4) M6 x 25mm Allen Bolt
- (2) M6 Steel Flat Washer
- (2) M6 x 75mm Stud
- (1) K & N Air Filter
- (1)Air Cleaner Top
- (1)Nylon Hose Barb
- (4)M5 Lock Washer
- (4)M6 Lock Washer
- (2)M6 Nylon Flat Washer
- (2)M6 Nylock Nut
Installation:
-
1. Some carburetors use a stud to hold the stock air filter on and some use bolts. If your carburetor uses studs then you will need to remove them.
2. If you are going to run the stock breather tube from the air filter to the front of the valve cover then you will need to install the supplied 90 degree hose barb in the bottom air cleaner plate. If you are going to eliminate the front breather tube then you need to install the supplied plug into the bottom air cleaner plate. LC Engineering recommends installing a breather filter onto the front of the valve cover if you are going to eliminate the breather tube.
3. LC Engineering supplies M5 bolts and M6 bolts. Determine what size threads are in your carburetor and use to proper size allen bolts and lock washers to install the bottom air cleaner plate to the carburetor. In very dusty areas LC Engineering recommends using a small amount of grease between carburetor and air cleaner bottom plate.
4. Install supplied studs into bottom plate. The shorter threaded section of the stud goes into the bottom plate. The longer threaded portion of the stud goes through the top plate. Use a thread locker such as Loctite on the studs where they go into the bottom plate. The studs do not need to be very tight, just a "snug" fit with Loctite will hold them in place.
5. Install new K & N air filter.
6. Install air cleaner top. Use supplied nylon washer, steel washer and nylock nut to fasten air cleaner assembly together. a.Put nylon washer between air cleaner top and steel washer to protect it from damage.
7. Regularly service K & N filter following K & N instructions.
6 Reviews Hide Reviews Show Reviews
-
Filter
Great Awesome product!!! What an upgrade really great look!!!
-
.
Works great and looks great. Perfect fit
-
K&N intake filter kit
Easy install, looks awesome.
-
Best filter
Works awesome with the spiral intake!!!
-
LCE Pro Billet Air Cleaner Kit - Weber Carb
What else can be said. Excellent service by the best.
-
LCE Staff
Knowledgeable and helpful staff! Thanks!
