• Trail-Link Four Crossmember You will need this crossmember if you are looking to put your own kit together. It is designed to fit between a frame width of 36.69". This product should not be used in a manner that violates Federal EPA Laws. Contact...
    $594.00
  • Front 3-Link Panhard Bracket (Rock Assault) Our Rock Assaultâ„¢ Front Three Link Pan Hard Bracket will allow you to use your current Trail-Link Threeâ„¢ Front 3-Link Kit with your new Rock Assaultâ„¢ Front Axle Housing. If you are ordering the Trail-Link...
    $169.39
  • Shock Mounts These shock mounts are designed to weld directly on to the Rock Assaultâ„¢ Front Axle Housing. NOTE: Sold as a pair. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for...
    $41.05
  • Spanner Wrench The proper tool for adjusting ride height on coil over springs. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further information at 928-575-2174. Check out ...
    $58.45
  • Air Shock Hoop Mounting Kit Most link kits do not come with upper shock mounts because the exo-cage or tube work varies from truck to truck so much it is hard to determine where shock placement will occur. At Trail-Gear, we understand this issue all...
    $196.71
  • Weld On Flat Tab (3" Cope) Our 3" coped weld on flat tab is made from 1020 hot rolled steel, 1/4" thick, and is designed for a 9/16" bolt. The width is 2" and the overall height is 2-15/16". The center of the hole is is 1-5/8" from the top of the cope,...
    $55.22
  • Weld On Flat Tab (9/16" Hole) Our weld on flat tabs are made from 1020 hot rolled steel, are 1/4" thick and are designed for a 9/16" bolt, they are 2" wide and 2 5/8" tall. The center of the hole is 1 5/8" from the bottom of the tab. These tabs are...
    $53.61
  • Winch Mount If you’re looking at building your own front bumper, one of our winch mount plates will make a great starting point. These winch mount plates bolt on in the factory frame holes, and are made from CNC bent 1/4" steel plate. We built...
    $283.79

LCE Performance is a trusted supplier of 1989-1995 Toyota pickup parts. Recognizing the unique characteristics of these trucks, LCE Performance offers a diverse range of components to enhance both the performance and aesthetic appeal of these vehicles.


Enthusiasts seeking engine upgrades for their 1989-1995 Toyota pickups can turn to LCE Performance for high-performance camshafts, cylinder heads, and exhaust systems. The company's selection of carburetor kits ensures optimal air and fuel delivery, contributing to improved power and efficiency for these iconic trucks.


LCE Performance also addresses suspension needs with lift kits and shocks, providing owners the opportunity to customize their trucks for off-road adventures or achieve a unique stance. Drivetrain components, including clutches and differentials, are available for those looking to fine-tune the performance of their vehicles for specific driving conditions.


With a commitment to quality and precision engineering, LCE Performance remains a go-to source for enthusiasts seeking to restore, modify, or upgrade their 1989-1995 Toyota pickups. By offering a comprehensive range of aftermarket solutions, the company ensures that these classic trucks continue to meet the evolving expectations of performance and reliabilit