-
Trail-Link Three Front 3-Link Bracket (Panhard / Axle) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a 3-Link or...$149.99 -
Round Collector Exhaust Gasket Set This Exhaust gasket is used on the stock exhaust manifold where it connects to the two exhaust pipes. In the stock application, two will be required, this is a kit and will include (2) gaskets. Alternate exhaust...$8.52 -
Trail-Link Four Crossmember You will need this crossmember if you are looking to put your own kit together. It is designed to fit between a frame width of 36.69". This product should not be used in a manner that violates Federal EPA Laws. Contact...$594.00 -
Front 3-Link Panhard Bracket (Rock Assault) Our Rock Assault™ Front Three Link Pan Hard Bracket will allow you to use your current Trail-Link Three™ Front 3-Link Kit with your new Rock Assault™ Front Axle Housing. If you are ordering the Trail-Link...$169.39 -
+4" HD Front Leaf Spring (For V6 and V8 Applications) Our front 3", 4", and 5" springs are now available in a heavy-duty version with a 25% higher spring rate. The HD leaf springs are great for heavier trucks and 4Runners with full bodies and...$925.97 -
+3" HD Front Leaf Spring Our front 3", 4", and 5" springs are now available in a heavy-duty version with a 25% higher spring rate. The HD leaf springs are great for heavier trucks and 4Runners with full bodies and exo-cages, V6 Toyota and Tacoma...$925.97 -
Shock Mounts These shock mounts are designed to weld directly on to the Rock Assault™ Front Axle Housing. NOTE: Sold as a pair. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for...$41.05 -
Spanner Wrench The proper tool for adjusting ride height on coil over springs. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further information at 928-575-2174. Check out ...$58.45 -
Air Shock Hoop Mounting Kit Most link kits do not come with upper shock mounts because the exo-cage or tube work varies from truck to truck so much it is hard to determine where shock placement will occur. At Trail-Gear, we understand this issue all...$196.71 -
Weld On Flat Tab (3" Cope) Our 3" coped weld on flat tab is made from 1020 hot rolled steel, 1/4" thick, and is designed for a 9/16" bolt. The width is 2" and the overall height is 2-15/16". The center of the hole is is 1-5/8" from the top of the cope,...$55.22 -
Weld On Flat Tab (9/16" Hole) Our weld on flat tabs are made from 1020 hot rolled steel, are 1/4" thick and are designed for a 9/16" bolt, they are 2" wide and 2 5/8" tall. The center of the hole is 1 5/8" from the bottom of the tab. These tabs are...$53.61 -
Chromoly Interlocking Tube Clamps (1" OD .065" Wall Thickness) Need to place a support tube across your truggy or buggy, but need the flexibility to remove a motor, transmission, or even a seat? We have the perfect solution for you, Trail-Gear’s...$50.04
-
fast shipping
Speed Delivery