• Piston Stop (Adjustable) These Proform piston stop tools are designed to stop the piston in order to find top dead center. They thread into the spark plug hole for accurate use. This stop will work in all vehicles that have a 14mm spark plug thread...
    $17.18
  • 22RE TPS Allen Bolt Upgrade Kit One challenge to adjusting the 22re TPS is that the screws are nearly impossible to access when the unit is in the vehicle. To make the adjustment easier LC Engineering offers a TPS bolt upgrade kit to replace the stock...
    $10.66
  • Plastigage Clearance Indicator (.001-.003 / .025mm-.076mm) Made from a special extruded plastic thread with accurately controlled crush properties, Plastigage provides a fast and accurate way to check bearing clearances. Plastigage is packaged in a...
    $7.55
  • Axle Loop Trailer Strap Axle loop ratchet straps are a great way to attach your trail rig to the trailer. One end wraps around the axle housing, the other end clips to your trailer D-ring. Ratchet action allows for quick tightening. Strap material is...
    $63.07
  • Lucas Oil Assembly Lube (8oz. Bottle) Lucas Assembly Lube is designed to be used as an initial lubricant to metal surfaces. It mixes with any oil and will not plug filters. This product clings to all surfaces and is an excellent rust inhibitor,...
    $10.29
  • 12" Flag / Checker Decal (LC Engineering) Decals increase horsepower! Not really, but you can show the person behind you why you're in front! Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...
    $2.06
  • Lightweight Crankshaft Pulley (2.5lbs) You want to squeeze out every last bit of acceleration and horsepower from your engine. Here it is. This lightweight crankshaft pulley is manufactured in the USA. This pulley is the same size as stock, so no belt...
    $214.19
  • 3mm Allen Wrench (Ball Head) This 3mm allen wrench is used mainly for our TPS screw upgrade kit. The ball end of the wrench allows off angle access to the TPS screws. This makes adjusting the TPS a lot easier if you are doing it in the vehicle. NOTE:...
    $8.19
  • Seal Saver (Rear Main Seal) Do you have a pesky oil leak coming from the rear main seal? Don't just keep swapping out rear main seals. LC Engineering carries this seal saver that slides right over the rear hub of the crank and rides between the crank...
    $13.94
  • MLS Head Gasket (96mm Bore x .040" Thick) This head gasket is the best one for a stock bore of 95mm and the next step of 95.5mm for naturally aspirated or boosted engines. Match this head gasket with our head stud set for the maximum in sealing with...
    $124.98