-
Round Collector Exhaust Gasket Set This Exhaust gasket is used on the stock exhaust manifold where it connects to the two exhaust pipes. In the stock application, two will be required, this is a kit and will include (2) gaskets. Alternate exhaust...$8.52 -
Spanner Wrench The proper tool for adjusting ride height on coil over springs. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further information at 928-575-2174. Check out ...$58.45 -
38 1/4" Drag Link The Tacoma Drag Link is 38 1/4" long and works with our Rock Assault™ Left-Hand Drop Front Axle Housing with 59" WMS to WMS. This drag link is made from .250" wall DOM 1.25" tubing, precision tapped, and features a left side thread...$135.06 -
Power Steering Hose Conversion Kit When installing a SAS kit on your Tacoma, the rack and pinion has to be removed and replaced, usually with an 86-95 Toyota IFS power steering box. Trail-Gear has developed a Power Steering Hose Conversion kit that...$151.48 -
Power Steering Hose Conversion Kit When installing a SAS kit on your Tacoma, the rack and pinion has to be removed and replaced, usually with an 86-95 Toyota IFS power steering box. Trail-Gear has developed a Power Steering Hose Conversion kit that...$168.65 -
Firewall Kit When doing a solid axle conversion on a Tacoma, you are required to remove the OEM rack and pinion steering system, which leaves a large hole in your firewall. Our Tacoma firewall plate fills that hole and bolts into the OEM fastener...$71.73 -
Front Shackle Kit Hanging leaf springs from your Tacoma can be very difficult, especially when it comes to the shackles. The frame is thin and there are not many complete shackle kits available on the market, while the kits that are available are...$475.73 -
Weld On Flat Tab (3" Cope) Our 3" coped weld on flat tab is made from 1020 hot rolled steel, 1/4" thick, and is designed for a 9/16" bolt. The width is 2" and the overall height is 2-15/16". The center of the hole is is 1-5/8" from the top of the cope,...$55.22 -
Weld On Flat Tab (9/16" Hole) Our weld on flat tabs are made from 1020 hot rolled steel, are 1/4" thick and are designed for a 9/16" bolt, they are 2" wide and 2 5/8" tall. The center of the hole is 1 5/8" from the bottom of the tab. These tabs are...$53.61 -
Chromoly Interlocking Tube Clamps (1" OD .065" Wall Thickness) Need to place a support tube across your truggy or buggy, but need the flexibility to remove a motor, transmission, or even a seat? We have the perfect solution for you, Trail-Gear’s...$50.04 -
Vehicle Recovery & Winch Accessory Kit The Rugged Ridge Recovery Kit includes everything you need to help your buddy next time he gets stuck in the mud. The durable carrying case is filled with a beefy pair of 9,500lb D-Rings, a 20,000lb Snatch Block...$178.44 -
Control Arm Bushings These bushings maintain proper alignment under extreme conditions on and off -road and during competition. Helps provide quicker steering response and greater vehicle control. Whatever your demands, proper alignment (caster and...$66.36
-
fast shipping
Speed Delivery