-
1-Bar Map Sensor (No Boost) Map sensors in 3 varieties (1 Bar, 2 Bar, and 3 Bar), and a barometric pressure sensor. 1 Bar Sensors are good for NA engines and measure from 0 (vacuum) to approximately atmospheric pressure. A 2 Bar Sensors is good for up...$98.89 -
Hall Sensor (Replacement) The Hall Sensor mounts on the front cover and uses magnets strategically mounted in the balancer pulley to generate a signal for proper ignition timing. Contact our Tech Support Line for further information at...$149.92 -
Fan Relay Electric fan relay upgrade for Pro Fuel Injection kits. Allows the computer in our Pro Fuel Injection kits to control your electric fan. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...$36.00 -
Air Conditioning / Fast Idle Solenoid This solenoid can be used for one of two options; A/C or Fast Idle. The Fast Idle/ A/C Solenoid does not require an additional valve. The fast idle option consists of extra circuitry added to the ECU, a control...$101.71 -
Air Temp Plate (Adapts Cold Start Injector to Air Temp Sensor) Custom made plate to install an air temperature sensor where the cold start injector normally sits. Contact our Tech Support Line for further information at 928-575-2174...$7.45 -
Fuel Pump Relay Fuel pump Relay for Pro Fuel Injection Kits. Required for the computer to turn on the electric fuel pump. Much easier than having an additional switch on the dashboard! Contact our Tech Support Line for further information at...$36.00 -
Knock Sensor Upgrade This is for the upgrade for the newest Pro Fuel Kits using the SDS computer. The upgrade will come with the Knock Sensor and adapter. Knock control allows the ECU to retard the ignition timing automatically if knocking is detected...$141.10 -
Crank Trigger Magnet Individual replacement crank position sensor magnets for our Pro Fuel Injection kits. These magnets get installed in the balancer pulley and trigger the hall effect sensor to generate a signal for the ignition system. NOTE: Sold...$8.19 -
Fuel Injector Cups & O-Rings Fuel Injector Cups and O Rings for OEM Toyota 3VZ 3.0 liter fuel injectors. Located on the intake manifold for the injectors to sit in. Age and heat will take its toll on these plastic parts. Not an easy spot to get to,...$107.07 -
Pro Air Fuel Tuning Module (Mixture Meter) The Pro Tuning Module gives you the ability to adjust the fuel curve in your 22RE. If your Air Fuel Ratio shows lean, turn the tuning module to a richer setting, it's just that simple. Contact our Tech...$96.36 -
Oxygen Sensor (Heated 4 Wire) This is considered a universal replacement for the 4-wire heated O2 sensor as well as a stock replacement. This would be an upgrade to the one wire but will require running power and ground to the sensor. Constructed from...$66.47 -
Direct Fit High Output Alternator (140 Amp / U.S. Models ONLY) LC Engineering's Direct Fit high output alternator is the answer to all your charging issues. Running big off-road lights, killer stereo or a winch but don't want to change to a one wire...$363.65
-
fast shipping
Speed Delivery