Creepy Twin T-Case Shifter (Forward Shift) Twin stick shifters allow independent control of the high/low and 2wd/4wd sections of your Toyota gear driven transfer case. This allows access to low range 2wd operation. It also allows you to shift in and...

Stick Shift Boot (Twin T-case) This boot is designed to work with our Creepy Twin T-Case shifter (above). It features a flexible rubber shell with a steel bottom plate for mounting to your floor board. Great for keeping engine heat and smell out of the...

Adapter Plate This adapter plate allows one or more gear driven transfer case(s) to be bolted up to 1988-1995 Toyota 3.0L V6 5 speed transmissions. Our updated design does not require modification to the transmission for installation thanks to the use...

Shift Detent Bolt (Heavy Duty Transfer Case) The stock transfer case shift springs tend to give a sloppy feel to the shifters and can lead to the transfer case shift lever popping out of gear on the trail. We recommend heavy duty shift springs be used...

Transfer Case Shifter w/ Knob If you are going for the multiple transfer cases setup, you will need shifters too! Great replacement for your old or broken Toyota stock shifter. NOTE: Does not include shifter base, for shifter base (Top Shift), see...

Transfer Case Shift Base If you are going for the multiple transfer cases setup, you will need shifters too! Great replacement for your old or broken Toyota stock shifter. NOTE: Does not include shifter, for shifter, see Part #: 2051665. This...

Trail Creeper 4.7 Transfer Case (21-Spline / Top Shift / Single Case) Single transfer case that features a 4.70 low range gear set. Each case is fully rebuilt and inspected. Triple drilled flanges are installed on both front and rear output. Can be...

Trail Creeper 4.7 Transfer Case (23-Spline Input / Single Case / Top Shift) Single transfer case that features a 4.70 low range gear set. Each case is fully rebuilt and inspected. Triple drilled flanges are installed on both front and rear output. Can...

Trail Creeper 4.7 Transfer Case (21-Spline Input / 4" Offset / Single Case / Forward Shift) Single transfer case that features a 4.70 low range gear set. Each case is fully rebuilt and inspected. Triple drilled flanges are installed on both front and...

Trail Creeper 4.7 Transfer Case (23-Spline Input / 4" Offset / Single Case / Forward Shift) Single transfer case that features a 4.70 low range gear set. Each case is fully rebuilt and inspected. Triple drilled flanges are installed on both front and...

Trail Creeper 4.7 Transfer Case (21-Spline Input / 4.5" Offset / Single Case / Forward Shift) Single transfer case that features a 4.70 low range gear set. Each case is fully rebuilt and inspected. Triple drilled flanges are installed on both front and...

Trail Creeper 4.7 Transfer Case (23-Spline Input / Forward Shift Fork / 4.5" Offset / Single Case) Single transfer case that features a 4.70 low range gear set. Each case is fully rebuilt and inspected. Triple drilled flanges are installed on both...