-
Street Distributor Cap New OEM style replacement distributor cap. A must when changing spark plug wires. Distributor caps can develop carbon tracks that can wreak havoc on the electrical path inside the distributor cap and cause drivability issues...$10.77 -
Vacuum Advance Plug (Distributor) When removing the vacuum advance on your factory distributor, this plug will keep foreign debris from entering the hole and causing problems. Only for a Distributor with the vacuum advance removed, as in a race engine...$10.66 -
Single Wire O2 Sensor Relocation kit If your O2 location has moved due to an aftermarket header, this single wire kit will extend the lead on your current connection. Contact our Tech Support Line for further information at 928-575-2174...$10.66 -
Plug Wire Separator Kit Pro Wires (8.5mm) - Black These composite separators are held together with allen head screws which are mounted flush within the loom. These separators are designed specifically to work with our billet wire loom and LC Pro Wires...$10.66 -
Plug Wire Separator Kit (8.5mm Pro Wires) These composite separators are held together with Allen head screws which are mounted flush within the loom. These separators are designed specifically to work with our billet wire loom and LC Pro Wires. They...$10.25 -
Pro Distributor Rotor The distributor rotor rotates inside the distributor and transfers the high tension current from the coil to the towers of the distributor cap. The firing end of the rotor, from which the high tension spark jumps to each of the...$9.38 -
Crank Trigger Magnet Individual replacement crank position sensor magnets for our Pro Fuel Injection kits. These magnets get installed in the balancer pulley and trigger the hall effect sensor to generate a signal for the ignition system. NOTE: Sold...$8.19 -
Air Temp Plate (Adapts Cold Start Injector to Air Temp Sensor) Custom made plate to install an air temperature sensor where the cold start injector normally sits. Contact our Tech Support Line for further information at 928-575-2174...$7.45 -
OEM Distributor Cap O-Ring This distributor cap O-ring seals the sensitive components inside the distributor from moisture and other contaminants from finding their way under the cap. Contact our Tech Support Line for further information at...$6.50 -
NGK Spark Plug R5672A-8 (10-18 Psi / 14:1 Comp) LC Engineering carries NGK V-Power spark plugs, which offer economical performance for your Toyota, and are the only plugs with NGK's V-Groove technology. They enhance the spark kernel, lower the voltage...$5.68 -
NGK Spark Plug R5671A-10 (30+ psi of Boost) NGK's V-grooved center electrode moves the spark to the outer edge of the electrode for improved ignitability in all combustion chamber conditions. This configuration is especially helpful for throttle...$5.68 -
Street Distributor Rotor The distributor rotor rotates inside the distributor and transfers the high tension current from the coil to the towers of the distributor cap. The firing end of the rotor, from which the high tension spark jumps to each of the...$5.57
-
fast shipping
Speed Delivery