-
Heat Riser Tubing (1.5" x 36") This heat riser tubing is just what you need if you need to keep the choke plate on your carbureted engine hooked to the exhaust for emissions purposes. This tubing goes from the heat shield on the exhaust manifold to the...$37.20 -
Heat Riser Kit (Attaches Heat Riser To Air Cleaner) This kit is used to connect a heat riser tube to the stock air cleaner assembly. This kit can be used on any header with 1.5" primary tubes. Kit Includes: (3) Hose clamps (1) 1.5″ Standoff (1)...$76.43 -
Oxygen Sensor Adapter (2-Bolt Style To Thread In Style) This kit will adapt a thread in style O2 sensor (18mm) to the Toyota two-bolt style. Includes gasket plate to adapt and two studs and nuts. Contact our Tech Support Line for further...$18.16 -
U Bend (6″ Radius) Use these 3" U-Bends for building your own headers or replacing a bent or damaged tube. NOTE: Size listed is the outside diameter. Constructed of mild steel. Contact our Tech Support Line for further information at...$46.85 -
Wastegate Block Off Plate (CNC Turbo Manifold) This block off plate goes under the CNC Turbo manifold (2) Bolt Style. 3/8" thick Ceramic Coated to handle the heat from our CNC turbo manifold. Contact our Tech Support Line for further information...$25.90 -
Garrett T3 Exhaust Discharge Flange (4-Bolt) Use 2.5" OD tubing in the groove or 3" OD tubing outside the groove. 3" OD is tight near the bolt holes but works fine so you're not limited to a 2.5" downpipe. Contact our Tech Support Line for...$24.84 -
Round Collector Exhaust Gasket Set This Exhaust gasket is used on the stock exhaust manifold where it connects to the two exhaust pipes. In the stock application, two will be required, this is a kit and will include (2) gaskets. Alternate exhaust...$8.52 -
Exhaust Manifold Stud and Nut When installing new aftermarket headers, new hardware should be used. An even clamping force is required to keep the header tight against the head in order to seal the exhaust gasket properly. The studs on your truck may...$4.12 -
Flowtech Shorty Header (Polished) Flowtech Exhaust products are the perfect combination of quality and value. We are proud to offer this 4 into 1 shorty header for your 1975-1981 Toyota Celica or 1975-1988 Toyota Pickup. This header is available in...$338.04 -
2-Bolt Wastegate Flange (You Choose Style) All of LC Engineering's flanges are laser cut then finished machined on the CNC to ensure exact tolerances and fit. These 2-bolt flanges fit most 38mm wastegates such as Tial, Turbosmart, and Turbonetics. They...$13.34 -
2-Bolt Flange (You Choose Size) 2 1/4" Flanges: Steel flange designed for connecting to our header collectors. This is perfect if you are fabricating your own exhaust from the header back. 3/8" thick, for 2-1/4" exhaust tubing. 2 1/2"...$13.34 -
2-Bolt Stub Connector (You Choose Size) 2 1/4" Flange This is a 2-bolt collector reducer to allow you to fabricate your own exhaust after our header. Bolts to our street header and has 2.25" stainless steel tubing to weld or clamp to. 2 1/2" Flange This...$25.70
-
fast shipping
Speed Delivery