Flex Fan w/ Billet Spacer Kit
Flex-a-lite high performance flex fans are designed to give you maximum airflow at low RPM, and the least amount of engine loading at high RPM. Less resistance at highway speeds equals more horsepower and better gas mileage. Flex fans pull additional air through the radiator at low RPM when the speed of the vehicle isn't enough to cool the engine's coolant system. At higher RPM, when the vehicle's speed forces ample air through the radiator, the fan blades flatten out, resulting in less power being used to spin the fan.
NOTE: By design, Flex Fans are noisier compared to a stock fan. Noise will not be a valid reason for the return of this item.
| Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501. |
- 1995.5-2004 2RZ 2.4L Engines
- 1995.5-2004 3RZ 2.7L Engines
Kit Includes:
- (1) Billet Fan Spacer
- (4) M8-1.25 x 16mm Hex Bolts
- (8) M8 Flat Washers
- (4) M6-1.25 x 30mm Hex Bolts
Installation:
- Loosen bolts that hold the fan to the water pump. Do not remove them just loosen them while the belt is still on to make removal easier.
- Remove water pump belt and then remove the fan assembly from water pump. You can also remove the fan shroud for extra room but this is not necessary.
- Remove stock fan studs in water pump and chase hub threads with a tap.
- Install the flex fan on the fan spacer using M8 Hex Bolts and M8 flat washers. Use a mild thread locking compound on bolts.
- Install hub and fan assembly on the water pump flange using the M6 hex bolts and M6 flat washers.
- Rotate engine by hand, checking for fan clearance before starting engine.
6 Reviews Hide Reviews Show Reviews
-
Great kit
Install was easy, quality of parts excellent. After replacing fan clutch and still getting intermittent high temps in certain traffic conditions I decided to go with the flex fan. Temp gauge does not move at all idling in traffic, A/C on high. Pretty impressive in the Tucson summer. Great product.
-
Great stuff
Love the fan and spacer keeps my motor nice and cool
-
Anonymous give 5 stars
I love this product, it was shipped and got to me just in time to install it before a 7 hour trip. I hope Jared is doing better too.
-
Anonymous give 5 stars
Installed fan and it’s not noisy at all. Needle on temp gauge is at the same place as old fan. No regrets! Customer Service was excllent, ordering parts was hassle free and got my parts in 4 days. Shipping was fast.
-
Works as described.
Had a spike on temp with my 2rz motor at stop lights. Come to find out my stock 277,000 mile clutch fan was not work as it should. This direct bolt on fan works great at idle , minus the semi sound of the fan blow mass amounts of air into the motor, so far I like it.
-
.
excellent quality and efficient design.