-
Driveline Spacer 1.5" (Longfield) Is your driveline too short after you do a lift? We have 1 inch and 1.5-inch spacers with bolts. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration...$62.54 -
Driveline Spacer 1" (Longfield) Is your driveline too short after you do a lift? We have 1 inch and 1.5-inch spacers with bolts. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration...$62.54 -
Upper Link Axle Bracket (3-Link / Front) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a 3-Link or 4-Link system...$61.93 -
Haltech iC-7 Standard Dash Mount Haltech’s new iC-7 Colour Display Dash is always better when it has the ability to mount with ease. Thats where this plate comes in, it makes life EASY. Grab yours today so you can spend your time doing what you...$61.80 -
Header Flange (You Choose Style) Steel header flange for custom fabrication of exhaust header on 20R, 22R, or 22RE engines. 1/2" thick flange with 1-1/2" or 1 5/8" ports. This header flange is the same one we use when constructing our headers in house...$61.75 -
OE Oil Pressure Gauge Sender This Oil Pressure Gauge Sender is a stock OE replacement for 22RE and 3VZ engines. After years of use, electric components can go bad and give false readings to the ECU, that is why we recommend replacing them with new...$61.31 -
Rock Slider Mounting Kit Our gusset kits include 3/16" thick plate steel for the frame and triangle corner gussets. This plate welds to the frame and the rock slider welds to the plate. Kit Includes: (8) plates (8) gussets This product should...$60.86 -
Rod End (You Choose Size) Don't be fooled by look a like rod ends, they are not all the same. These rod ends are the strongest on the market, tested, and proven. The main body of this rod end is 100% 4340 chromoly and then finished with a zinc coating,...$60.68 -
Matsuba Drive Shaft U-Joints (Stock Replacement) OEM Replacement U-Joint. We have tested these joints to 3700 ft-lbs of torque before failure. Includes four install clips and Zerk grease fitting. NOTE: Does not fit CV side of driveline. Contact...$60.58 -
Spring Hangers (Sloped / Welded) Installing longer rear springs requires moving the rear spring hangers forward on the frame. The factory hangers are too thin to cut off and reuse. These hangers weld under the frame, forward of the stock units. Holes...$60.50 -
Control Arm Bushings These bushings maintains proper alignment under extreme conditions on and off -road and during competition. Helps provide quicker steering response and greater vehicle control. Whatever your demands, proper alignment (caster and...$59.94 -
Street Tune-up Kit (w/ Plug Wires) A tune up kit that won't break the bank, for your 1980 to1992 20R/22R/RE from LC Engineering. Included are (4) NGK Spark Plugs BKR5EYA, a set of Denso Spark Plug Wires (Black), a Street Distributor Cap (black), and a...$59.94
-
fast shipping
Speed Delivery