S&B Precision II Cleaning & Oil Kit (Red Oil)

S&B Precision II Cleaning & Oil Kit

(88-0008)

The complete system for accurately cleaning and re-oiling your air filter. Works on any S&B filter and 95% of all other high performance filters.

Specifications:

• Maximize performance and longevity
• Enough oil to service most filters 3 times
• Precise graduated oil applicator bottle
• Easy to use trigger applicator

Step 1: Remove and Clean

• Clean sealing area of filter and filter housing with a clean soft rag.
• Tap the filter on a hard surface to remove and loosen large particles and debris. (A soft brush may be used to loosen large particles of debris or bugs.)
• Use S&B’s Filter Cleaner to clean the filter.
• Gently rinse out the cleaner using low pressure water.
• Let filter dry for at least 24 hours.

Step 2: Fill and Apply

• Fill applicator with exact amount of oil required for your filter.
• Starting 1/2 way from base make 2-3 passes around the circumference of the filter in the same area.
• Repeat this process evenly spacing out the passes.

Step 3: Inspect and Install

• Allow oil to bleed for 20-30 minutes.
• Inspect the filter for any white areas the oil did not cover.
• With the remaining oil in the applicator apply a small amount of oil to those white areas.
• Do not over oil your filter.