+5" Rear Lift Kit These rear lift kits are designed to match the front Solid Axle Swap and Front Lift Kits. Kits feature long travel springs and shocks for super flexibility on the trail. These Rear Lift Kits are intended for use on (89-95) trucks...

Rack & Pinion If your Tacoma rack & pinion steering is worn out, damaged or leaking we have the replacement rack you need. We are not using just any rebuilt unit, these rack & pinions are brand new!! That means less failure and better...

Shim Pack (Six Shooter Knuckle) Shim pack for 6-shooter knuckles. In order to maintain proper steering geometry and prevent binding or mis-alignment, we offer this assortment of shims. Contact our Tech Support Line for further information at...

Labor for Installing Magnets in Pulley We provide the service of installing the magnets in the harmonic balancer for the stand-alone pro fuel system. With a two day turnaround, we can get this job done right the first time. LC Engineering offers a...

Cylinder Head To Block Dowel Pin When installing a new head on your 2RZ or 3RZ, these dowel pins can make head gasket alignment much easier. by installing these in the block, the gasket and cylinder head all fit snugly and perfectly aligned to ensure...

2-Bolt Flange (2 1/4") Steel flange designed for connecting to our header collectors. This is perfect if you are fabricating your own exhaust from the header back. 3/8" thick, for 2-1/4" exhaust tubing. Contact our Tech Support Line for further...

Rod Bearing Set (Pro Journal) Some of the most common questions we get at LC engineering are: What is a Pro Journal? Is it better than a Toyota Journal? What bearings do I need? Well, let's try to clear the issue up a bit. During the R&D process on...

Connecting Rod (Pro Journal / Chrome-moly Crossbeam) This is Pauter's unique single rib design E- 4340 chrome-moly forged rod. Overall, the clean, windage-reducing design and strength of these Pauter rods have proven to be extremely popular with...

Oil Pan This is a replacement oil pan for your Toyota Tacoma and 4Runner. Replacement for OEM Toyota Part #: 12101-75050 NOTE: This pan will use this drain plug. Contact our Tech Support Line for further information at 928-575-2174...

Turbo Piston Ring Set (96mm / +.040") All of LC Engineering's forged pistons now come standard with gas nitride ring sets. These rings were developed originally for boosted applications (turbochargers and superchargers). However, when applied to our...

Street Piston Set w/ Rings (95.00mm / Standard) Hypereutectic Pistons LC Engineering carries a full line of Street series Hypereutectic pistons for whatever engine you have. The Hypereutectic process allows for a much stronger piston that will not...

Street Piston Set w/ Rings (95.50mm / +.020") Hypereutectic Pistons LC Engineering carries a full line of Street series Hypereutectic pistons for whatever engine you have. The Hypereutectic process allows for a much stronger piston that will not...