Hub Bolt (Intake Camshaft) New camshaft bolt for the intake cam on 2RZ and 3RZ engines. We recommend replacing this bolt if you replace the stock cam gear for one of our adjustable cam gears. OEM Toyota Part #: 90105-12261 This product should not...

OEM Distributor Cap O-Ring This distributor cap O-ring seals the sensitive components inside the distributor from moisture and other contaminants from finding their way under the cap. Contact our Tech Support Line for further information at...

Pilot Bearing The crankshaft pilot bearing does not require routine maintenance, but should be replaced when clutch replacement becomes necessary. In some cases, pilot bearings can wear excessively when mounting bolts loosen. Contact our Tech...

NGK Spark Plug BKR5EKB-11 LC Engineering carries NGK V-Power spark plugs, which offer economical performance for your Toyota, and are the only plugs with NGK's V-Groove technology. They enhance the spark kernel, lower the voltage requirement of the...

Pro Valve Shim (8mm Under Bucket / 1.45mm - 1.80mm) LC Engineering upgraded cam buckets re-locate the valve shim from the top of the bucket to underneath the bucket. When the shims get re-located, you will have to change the shim to these under bucket...

Pro Valve Shim (8mm Under Bucket / 2.25mm - 2.60mm) LC Engineering upgraded cam buckets re-locate the valve shim from the top of the bucket to underneath the bucket. When the shims get re-located, you will have to change the shim to these under bucket...

Pro Valve Shim (8mm Under Bucket / 2.65mm - 3.00mm) LC Engineering upgraded cam buckets re-locate the valve shim from the top of the bucket to underneath the bucket. When the shims get re-located, you will have to change the shim to these under bucket...

Pro Valve Shim (8mm Under Bucket / 3.05mm - 3.30mm) LC Engineering upgraded cam buckets re-locate the valve shim from the top of the bucket to underneath the bucket. When the shims get re-located, you will have to change the shim to these under bucket...

Tie Rod Boots (Pair) At last it is possible to replace a damaged tie rod dust boot without having the expense of buying an entire new tie rod! These boots resist damage from rocks, sand, water, road salt, and oils better than many other O.E.M. rubber...

OE PCV Valve This is a factory replacement, quality PCV valve. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent the product listed. Please...

PCV Grommet New PCV grommet for valve cover on 2RZ and 3RZ engines. Be sure to replace the grommet whenever you replace the PCV valve. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...

Street Performer Retainer (Single Spring) Our Street Performer Retainers are an excellent OEM replacement that matches our street performer valve springs perfectly. If you have a mild street motor that doesn't need anything exotic in the valvetrain,...