-
2-Bolt Stub Connector (You Choose Size) 2 1/4" Flange This is a 2-bolt collector reducer to allow you to fabricate your own exhaust after our header. Bolts to our street header and has 2.25" stainless steel tubing to weld or clamp to. 2 1/2" Flange This...$25.70 -
Merge Collector (You Choose Size) You've got that header all constructed, now you just need a collector to tie it all together. LC Engineering has already done the work for you, just pick the one for your application, slip it on, and weld it up! These...$25.70 -
Water Bypass Hose LC Engineering is now offering an OEM water bypass hose. OEM Toyota Part #: 16261-35030 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images...$25.56 -
Coolant Temperature Sensor (Square Plug) This Temperature Sensor is a stock replacement for 22RE engines. After years of use, electronic components can go bad and give false readings, that is why we recommend replacing them with new ones for accurate...$25.49 -
Garrett T3 Exhaust Discharge Flange (4-Bolt) Use 2.5" OD tubing in the groove or 3" OD tubing outside the groove. 3" OD is tight near the bolt holes but works fine so you're not limited to a 2.5" downpipe. Contact our Tech Support Line for...$24.84 -
Rear Seal Gasket Assembly High-quality silicone seals with a double lip for improved sealing. Includes OEM rear main seal & housing gasket. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...$24.82 -
Aluminized Heat Sheath (1.25" x 3') This aluminized sleeving reflects heat from wiring and hoses. Heat Sheath is easily cut to length. For use on cars, street rods, and trucks. This product should not be used in a manner that violates Federal EPA...$24.82 -
Micro Activation Switch & Bracket This micro-switch and bracket enables performance enthusiasts to activate solenoids, fuel pumps, and most anything else. A micro throttle switch can be used as either the primary method of activating a Nitrous...$24.57 -
Trail Shovel (Recovery & Utility) The Recovery Utility Tool (RUT) is a fully functional collapsible Military Style shovel with easy grip and light handle with carbon steel blade that is heat treated for high strength and features double serrated...$23.78 -
Hall Sensor Mount This bracket is needed if you are installing our Pro Fuel Injection Systems on a 22RE engine. This mount will locate the Hall sensor in the right location for both the stock pulley and the LC Engineering underdrive pulley. This...$23.51 -
OEM Bell Housing to Block Bolt Set After many years of sitting in your engine compartment, the bell housing bolts might not be in the best shape, especially if you've had the engine or trans out a few times. Instead of scrambling to replace a bolt or...$23.51 -
Coolant Temp Sensor Connector This coolant temperature sensor connector is a replacement for 1989-1995 22RE applications. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes...$23.51
-
fast shipping
Speed Delivery