26" Extended Brake Line (Front / Female - Female) These steel braided brake lines are 26" long and are DOT approved. Front lines use factory mounting clips so there is no need to modify the factory clips in any way. Specifications: Size:...

26" Extended Brake Line (Rear / Female - Male) These steel braided brake lines are 26" long and are DOT approved. Front lines use factory mounting clips so there is no need to modify the factory clips in any way. Specifications: Size...

Replacement Brake Pads (For Disc Conversion Kits) These pads are only meant to work with our Disc Brake Conversion Kits. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes...

Line Lock (Mechanical) This mechanical line lock will allow you to use your normal brake hydraulics to hold your brakes locked. You plumb your rear brake line through this line lock and then you simply press the line lock button down while pushing your...

Front Brake Pads Need and inexpensive way to stop your Toyota truck. Try these Premium Semi-Metallic asbestos-free front replacement brake pads. This pad is for use with the late-model IFS 4WD calipers. If you are adding the vented rotors and upgraded...

Rear Disc Brake Pads Semi-metallic replacement brake pads for your Pickup or 4Runner rear disc brake kits. NOTE: These brake pads are only used as a replacement for our kit, see Part #: 1055202. Contact our Tech Support Line for further...

Dust Shield Eliminator Kit The brake backing plates can be a bother on front Toyota solid axles. They often get bent from trail damage and small rocks can get trapped between the backing plate and the rotor causing noise and damage. For many years we...

Residual Valve (2 PSI) When converting your rear drum brakes to disc you will need to hold pressure on the rear line to keep the pads in contact with the rotors. If you don't then you will have to pump your pedal to get a firm brake feel. This residual...

Custom Brake Line (Upgrading to 1" Bore Master Cylinder) Because we know how much everybody hates making custom brake lines, this line comes ready to plug and play. It will bolt right onto your new 1" Bore Master Cylinder with no major modifications...

Swagelok (1/8" NP Male To 3/16" Tubing) These neat little devices make it much easier to plumb in brake accessories, like proportioning valves, line locks etc... One end has 1/8"npt threads to go into most brake accessory ports. The opposite end has a...

Caliper Bleeder Screw The caliper bleeder screws are often stripped out and difficult to open. Replace your damaged, clogged, or stripped out caliper bleeder screw with one of these. This is just one of the many parts we carry for brake hardware...

Trail Gear Brake Line Clip & Mount (Rear Line Only) This brake line mount kit is designed to fit Trail Gear extended length brake lines. If you've added a little (or a lot) extra ground clearance and suspension travel, you probably have added some...