-
S&B Precision II Cleaning & Oil Kit (88-0008) The complete system for accurately cleaning and re-oiling your air filter. Works on any S&B filter and 95% of all other high performance filters. Specifications: Maximize performance and...$30.85 -
S&B Filter Wrap (WF-1034) This filter wrap is made specifically for the oval filter on S&B's CAI for 2007-2012 Sequoia 5.7L and 2007-2018 Tundra 5.7L. Filter wraps act as a sort of pre-filter, and can prolong the life of your dry or cotton...$30.85 -
J-Bend 409 Stainless Steel / .065 Wall (Choose Your Size) LC Engineering sells stainless tubing for your project. 409 is the most inexpensive and available stainless steel in the 400 series. It is suitable for normally aspirated header applications and...$30.85 -
Green Electric Fan Switch (Illuminated) Flex-a-lite auxiliary illuminated single throw rocker switch provides cockpit control or override of fan function. This switch may be wired to actuate a fan, regardless of temperature settings, and you also can...$30.31 -
LC Engineering Classic Flexfit Hat (Modern Flag) Show your support at the races or while you're out rock crawling with an LC Engineering hat! Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...$29.23 -
Weld On Flat Tab Standard (You Choose Size) TG Weld On Coped Tabs are made from steel, 3/16" thick with a 1/2" diameter hole, and are available in standard or offset. Tabs are coped for either 1 1/2" tubing or 1 3/4" tubing. NOTE: Shipped raw and...$28.23 -
Stock Replacement U-Joint 4WD (Heavy Duty w/ Zerk) Looking for a top quality replacement U-Joint? This joint has been tested to 4,000 Ft.-Lbs. of torque in our axle testing machine. These joints are up to any task and will handle high output motors and...$27.01 -
Stock Replacement U-Joint (Heavy Duty w/ Zerk) Looking for a top quality replacement U-Joint? This joint has been tested to 4,000 Ft.-Lbs. of torque in our axle testing machine. These joints are up to any task and will handle high output motors and low...$26.23 -
Wastegate Block Off Plate (CNC Turbo Manifold) This block off plate goes under the CNC Turbo manifold (2) Bolt Style. 3/8" thick Ceramic Coated to handle the heat from our CNC turbo manifold. Contact our Tech Support Line for further information...$25.90 -
2-Bolt Stub Connector (You Choose Size) 2 1/4" Flange This is a 2-bolt collector reducer to allow you to fabricate your own exhaust after our header. Bolts to our street header and has 2.25" stainless steel tubing to weld or clamp to. 2 1/2" Flange This...$25.70 -
Merge Collector (You Choose Size) You've got that header all constructed, now you just need a collector to tie it all together. LC Engineering has already done the work for you, just pick the one for your application, slip it on, and weld it up! These...$25.70 -
Garrett T3 Exhaust Discharge Flange (4-Bolt) Use 2.5" OD tubing in the groove or 3" OD tubing outside the groove. 3" OD is tight near the bolt holes but works fine so you're not limited to a 2.5" downpipe. Contact our Tech Support Line for...$24.84
-
fast shipping
Speed Delivery