-
EFI Intake Bolt (Long) M8-1.25 x 95mm Socket Head Cap Screw for use on EFI intake. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further information at 928-575-2174. Check out ...$2.58 -
Dowel Pin (Aligns Cylinder Head To Block) When installing a new head on your 20R, 22R or 22RE, these dowel pins can make head gasket alignment much easier. by installing these in the block, the gasket and cylinder head all fit snugly and perfectly...$2.52 -
Large Oil Galley Plug (3/8"-19 BSPT) Every 20R/22R/RE/RET block and crankshaft have numerous oil port locations that need to be plugged off. You will need two, one goes in the front of the block, and one goes in the rear of the block. LC Engineering...$2.03 -
Medium Oil Galley Plug (1/4"-19 BSPT) Every 20R/22R/RE/RET block and crankshaft have numerous oil port locations that need to be plugged off. You will need four of these for the crankshaft and one for the inside of the block under the oil filter...$2.01 -
Pick Up Tube Gasket (Oil Pan) This gasket seals the oil pickup to the block. Guarantees the oil makes it into the pump instead of leaking back into the pan. OEM Toyota Part #: 15147-38020 Contact our Tech Support Line for further information at...$1.98 -
Small Oil Galley Plug (1/8"-28 BSPT) Every 20R/22R/RE/RET block and crankshaft have numerous oil port locations that need to be plugged off. You will need two for the passenger side of the block. LC Engineering can supply you with all these hard to...$1.54 -
Crankshaft Key (Woodruff Key) Crankshaft keys (also called woodruff keys) are semicircular shaped, removable keys that fit into matching keyways cut into the crankshaft leaving protruding tabs. These tabs mate with matching slots on the harmonic...$1.54
-
fast shipping
Speed Delivery