Odds and Ends

Aluminum Oil Catch Can Dual Baffle - Black What are the benefits of running a catch can? An oil catch can installs between your crankcase vent and intake system, replacing the traditional factory vent lines and catching oil that would otherwise enter...

OEM PCV Hose This is the OEM 22R PCV hose for the PCV Valve on top of the valve cover. OEM Toyota Part #: 12261-38011 This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further...

PCV Hose This is the OEM 22RE PCV hose for the PCV Valve on top of the valve cover. OEM Toyota Part #: 12261-35011 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...

Breather Hose (Front Of Valve Cover) OEM Toyota hose comes off the valve cover and goes to intake manifold. OEM Toyota Part #: 12262-35030 NOTE: Not for carbureted applications. For carb applications, see Part #: 1072413 (1984 only), or Part #: ...

A/C Power Steering Idler Pulley Maintain precise engine accessory operation with a premium replacement A/C and Power Steering Idler Pulley from LC Engineering. This pulley is vital for keeping the correct, constant tension in your engine's accessory...

Breather Hose (Front Of Valve Cover) OEM Toyota hose comes off the valve cover and goes to intake manifold. OEM Toyota Part #: 12262-35060 NOTE: Not for carbureted applications, for carbureted models, see Part #: 1072413 (1984), or Part #: ...

Water Bypass Hose (Bottom of Intake Manifold) OEM Toyota hose comes off the coolant hose from timing cover and runs to the bottom of intake. OEM Toyota Part #: 16261-35061 NOTE: Not for EFI applications.       Contact our Tech Support Line...

Breather Hose (Front Of Valve Cover) OEM Toyota hose comes off the valve cover and goes to intake manifold. OEM Toyota Part #: 12262-35040 NOTE: Not for EFI applications. For EFI applications, see Part #: 1072415 (1984-1988), or Part #: 1072411...

OE Replacement Valve Cover Breather Hose Restore your fuel-injected engine's crankcase ventilation system and prevent unmetered vacuum leaks with this premium Original Equipment (OE) style breather hose. Positioned at the front of the valve cover, this...

OE Replacement 22RE PCV Hose Restore proper crankcase ventilation and eliminate rough idling or vacuum leaks with this premium Original Equipment (OE) style PCV hose. Over time, heat cycles and oil vapors cause the factory rubber hose to become brittle,...

OE Replacement Valve Cover Breather Hose Restore your fuel-injected engine's crankcase ventilation system and prevent unmetered vacuum leaks with this premium Original Equipment (OE) style breather hose. Positioned at the front of the valve cover, this...

-10 AN Fitting For Oil Catch Can  AN 10 Fitting. Designed to work with our new catch can so you can use braided hose and AN fittings.   -10AN ORB to -10AN