-
Water Block Plate (Center Of Head) If you are installing an Offenhauser intake (or if you are eliminating the heater core), there won't be room for the heater core outlet off the cylinder head. This water block plate goes in the center of the cylinder...$18.45 -
Exhaust Gasket OEM style gaskets offer the best possible seal for your stock manifold or header. All the LC Engineering headers are designed to use the factory gaskets. Traditional paper exhaust gaskets do not last as long as the factory style gaskets...$18.40 -
Water Block Plate (Timing Cover Passenger Side) This block plate goes on the passenger side of the timing cover. Perfect for eliminating the unnecessary water hoses going around your engine compartment. Contact our Tech Support Line for...$18.17 -
Water Block Plate (Timing Cover Driver Side) This block plate goes on the driver's side back of the timing cover which is for deleting the factory heater return line on most 22's. Contact our Tech Support Line for further information at...$18.17 -
Oxygen Sensor Adapter (2-Bolt Style To Thread In Style) This kit will adapt a thread in style O2 sensor (18mm) to the Toyota two-bolt style. Includes gasket plate to adapt and two studs and nuts. Contact our Tech Support Line for further...$18.16 -
Fan/Alternator Belt (1975 - 1995) Pickup & 4Runner 20R/22R/RE/RET This high Performance V-Belt is designed with being a workhorse in mind, the polyester cord provides maximum power transfer and tension holding capability for the life of the belt...$18.16 -
OEM Shifter Boot (Square) Over time the factory shift lever boot can get worn out or start to break down and disintegrate. When this happens it can result in dirt or mud getting into the transmission shifter housing and then into the transmission. This...$18.13 -
Underdrive Belt (6" Street Kit) This belt is used on the LC Engineering Pulley Kit for the 6" Water Pump and the 4" Crank Pulley with alternator assembly. Contact our Tech Support Line for further information at 928-575-2174. Note: Images...$17.55 -
Teflon Heat Isolation Gasket (Intake) Teflon Heat Isolator kits keep the power-robbing heat away from the intake air. By keeping the heat out of the intake manifold, the incoming air is cooler, therefore making more power. This is the ultimate for...$17.47 -
Axle Housing Breather (Replacement) Factory Toyota axle housing breather. Internal spring loaded flapper valve prevents water from entering through breather during water crossings. Stock replacement for old, rusted or damaged units. This product...$17.46 -
Piston Stop (Adjustable) These Proform piston stop tools are designed to stop the piston in order to find top dead center. They thread into the spark plug hole for accurate use. This stop will work in all vehicles that have a 14mm spark plug thread...$17.18 -
Brass Freeze Plug At the beginning of any complete engine build-up, the block needs to be cleaned. To do that, all of the block's plugs must be removed (even with a new engine) to allow cleaning access to areas that enable oil or coolant to flow. LC...$17.09
-
fast shipping
Speed Delivery