-
ORB -06 To AN -06 Male Fitting Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any...$4.24 -
Throttle Linkage (Nut & Tab Washer) Have you lost your linkage bracket nut? No stress LC Engineering has you covered. We offer this kit to make your life a little easier. It will include one M8 x 1.0 nut as well as one Tab Washer to keep it from...$3.46 -
22RE Fuel Pressure Damper Washer This fuel damper washer is a stock replacement for the worn out one. You will need (1) as well as (1) of these 1025050 washers for each damper. NOTE: Sold individually. Contact our Tech Support Line for further...$3.33 -
Throttle Body Gasket Throttle body gaskets can be a source of more issues then they are often given credit for. Anytime you remove your throttle body it is best to replace the gasket because tiny imperfections you may not see can cause vacuum leaks...$3.09 -
Throttle Shaft Nut Have you lost your linkage shaft nut? No stress LC Engineering has you covered. We offer this to make your life a little easier. Don’t wait until it is too late, grab one today. Contact our Tech Support Line for further...$2.88 -
Base Gasket Fix or prevent pesky vacuum leaks at the carburetor base by replacing the gasket between your stock 22R Aisin carb and the intake manifold. Genuine Toyota quality gasket. Contact our Tech Support Line for further information at...$2.57 -
OEM Vent Hose Spring Clamp Need to connect the vent hose and secure it properly? Simply get these spring clips into place, and release. Nothing makes a job easier than having proper fitting replacement parts. Look no further, LC has you covered. OEM...$2.14 -
Holley Base Gasket Avoid annoying vacuum leaks and replace the gasket any time you remove the carburetor from the intake. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes...$2.11 -
Idle Jet Holder O-Ring These O-Rings seal the idle jet holder to the main carburetor housing. O-Rings can become brittle with age and cause annoying (and dangerous) fuel leaks. NOTE: O-Rings sold individually. Contact our Tech Support Line for...$2.11 -
Fuel Injector O-Rings Located on the fuel rail end of the injectors. LC Engineering suggests changing these when rebuilding or servicing the engine or the manifold assembly. LC Engineering flow-matched fuel injectors include new o-rings in the kit...$2.09 -
Base Gasket Avoid or fix annoying vacuum leaks by replacing the base gaskets between your carburetor and intake manifold. We recommend this gasket to be replaced any time the carb is removed from the manifold. Contact our Tech Support Line for...$2.01 -
Manifold Adapter Gasket (Holley Carburetor to Stock 22R) This gasket is made for our custom carb adapter that mates your Holley carburetor to a stock 22R intake manifold. NOTE: This gasket is used in our smooth bore as well as spiral bore adapter...$2.01
-
fast shipping
Speed Delivery