-
Fuel Pressure Safety Switch Use this (5 Psi) fuel pressure safety switch (normally open) to control your car's fuel pressure and avoid the risk of shooting nitrous with too little pressure to supply the extra fuel required. You don't want to be...$82.29 -
Standard Bottle Heater NOS systems are calibrated for optimum performance with a bottle pressure of 900- 950 psi. The pressure will change with temperature. Heater kits are thermostatically controlled to keep the bottle at 85 F. Powered by 12 Volt DC...$254.36 -
Nitrous Bottle Blanket (7" Diameter) Insulating the bottle helps maintain pressure by keeping heat in the bottle when it's cold, or heat out when it's hot outside. The blankets are made of rugged, easily cleaned Nylon outer shell with insulation. It's...$70.27 -
Intercooler Spray Bar This Intercooler spray bar has a new snake design delivers 20% greater intercooler coverage area for improved cooling. Decreases intake air temperatures by 20 degrees F and allows you to safely run more boost for more power. Cut...$281.14 -
10 oz. Standard Bottle Bracket NOS brackets are designed to securely hold your Nitrous bottle at the proper angle for maximum flow through the siphon tube. Standard brackets available made of steel with black vinyl coating. Contact our Tech...$101.03 -
Lower Shock Mounts These shock mounts are designed to weld directly onto the axle housing. These mounts can be used on front or rear axle applications. Made from 3/16" plate steel. Mounts have curved bottoms that can be mounted horizontally or...$43.00 -
Johnny Joint 1.25" Rod End (Right Threaded) Forged Johnny Joint® rod ends feature forged steel construction, a 1 1/4"-12 right hand threaded shank and come fully assembled with our standard Johnny Joint internals (2.625" wide ball center with a...$82.35 -
Johnny Joint Jam Nut (Right Threaded) These jam nuts are good to have if you spend a lot of time working on your rock crawler suspension. These jam nuts tighten against the rod ends to keep them from loosening. 1 1/4"-12 right hand thread jam nut for...$7.17 -
Recessed 10mm Allen Socket (3/8" Drive) This 10mm x 3/8" Drive Recessed Allen Socket is specifically designed to work with the Magnetic Drain Plugs, see Part #'s: 2053160 and 2053162. This product should not be used in a manner that violates...$13.81 -
Billet Aluminum Fairlead (w/ 10" Center) Polished aluminum hawse fairlead. Designed for use with synthetic winch rope. Mounting holes are 10" on center for standard 3/8" bolts, compatible with most 5,000-9,500lb winches. Ultra smooth guide surface...$83.57 -
90 Degree Elbow JIC Need some basic parts for your hydraulic ram steering? With hydraulic hose, high quality crimped connections and JIC 6 ends, these steering components will last. Optional Parts: 1/4" NPT Plug, see Part #: 2060078 Hydraulic...$16.03 -
Tan Exhaust Wrap Kit (2" x 50') The first step in controlling underhood temperatures is to keep heat in the exhaust and evacuate it out of the engine compartment. DEI’s Exhaust Wrap will reduce under hood temperatures by up to 50%, while...$135.18
-
fast shipping
Speed Delivery