Haltech Multi-Function CAN Gauge Haltech’s new Multi-function CAN Gauge displays real-time data from your Haltech ECU. Supported parameters such as boost pressure, air/fuel ratio, coolant temperature, fuel pressure, ethanol content, etc. can...

Hand Held LCD Controller Lost the controller for your LC Pro Fuel System? Don't worry, we now offer the hand-held LCD programmer by itself. This unit plugs into the ECU via a six foot cable. This also takes the place of the laptop used on most other...

Pro Spark Plug Wires (Cut To Length w/ HEI Style Ends) Magnecor's KV85 competition 8.5mm ignition cables features Magnecor's exclusive 2.5mm high-capacity metallic inductance EMI-suppressed conductor consisting of stainless steel wire precisely wound...

Pro Spark Plug Wires (Cut To Length w/ HEI Style Ends) Magnecor's KV85 competition 8.5mm ignition cables features Magnecor's exclusive 2.5mm high-capacity metallic inductance EMI-suppressed conductor consisting of stainless steel wire precisely wound...

Hall Sensor (Replacement) The Hall Sensor mounts on the front cover and uses magnets strategically mounted in the balancer pulley to generate a signal for proper ignition timing. Contact our Tech Support Line for further information at...

Knock Sensor Upgrade This is for the upgrade for the newest Pro Fuel Kits using the SDS computer. The upgrade will come with the Knock Sensor and adapter. Knock control allows the ECU to retard the ignition timing automatically if knocking is detected...

Haltech iC-7 Moulded Panel Mount Haltech’s new iC-7 Colour Display Dash is always better when it has the ability to mount with ease. That's where this plate comes in, it makes life EASY if you have a custom build and would like to have that...

Automatic Transmission Upcharge (Haltech) Putting a Haltech ECU and wiring harness into your rig but it's an Automatic? No problem, this will cover modifications necessary for the build. Contact our Tech Support Line for further information at...

Hall Sensor Mount When installing our LC Pro Fuel Injection System on a 5VZ (3.4 V6), this bracket mounts the Hall Effect Sensor perfectly to generate a signal from the crank pulley. Contact our Tech Support Line for further information at...

Air Conditioning / Fast Idle Solenoid This solenoid can be used for one of two options; A/C or Fast Idle. The Fast Idle/ A/C Solenoid does not require an additional valve. The fast idle option consists of extra circuitry added to the ECU, a control...

1-Bar Map Sensor (No Boost) Map sensors in 3 varieties (1 Bar, 2 Bar, and 3 Bar), and a barometric pressure sensor. 1 Bar Sensors are good for NA engines and measure from 0 (vacuum) to approximately atmospheric pressure. A 2 Bar Sensors is good for up...

Pro Fuel Map Sensor (SDS) Map sensors in 3 varieties (1 Bar, 2 Bar, and 3 Bar), and a barometric pressure sensor. 1 Bar Sensors are good for NA engines and measure from 0 (vacuum) to approximately atmospheric pressure. A 2 Bar Sensors is good for up to...