-
Fuel Pressure Safety Switch Use this (5 Psi) fuel pressure safety switch (normally open) to control your car's fuel pressure and avoid the risk of shooting nitrous with too little pressure to supply the extra fuel required. You don't want to be...$82.29 -
Water Pump When rebuilding your engine or replacing the timing chain, it is always a good idea to include a new water pump. We have the highest quality Toyota water pumps in stock all of which are new OEM quality Japanese-manufactured (Nissan or Aisin)...$80.72 -
Rear Shackle Mounts If you're installing longer rear springs you may need to relocate your rear shackle mount. You can do this by cutting off the original units with a die grinder and then welding them back on. You can also cut off the old ones and...$80.53 -
Rear Axle Bearing Pocket These rear axle bearing pockets fit most Toyota Pickup and 4Runner axles made from 1979 to 1995. This bearing pocket is made from 4340 chromoly and allows you to use our rear Toyota or Samurai Rock Assault axle housings with an...$80.53 -
2.5" Energy Suspension Bump Stops Polyurethane Bump Stops Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Features: Low profile competition style bump stop...$79.69 -
Ring Compressor Cone (3.580" - 3.675") This adjustable ring compressor features billet aluminum construction and is hard anodized for a longer life. It has a tapered face and will adjust from 3.580" - 3.675" (90.93mm - 93.34mm). NOTE: We use this for...$76.76 -
Heat Riser Kit (Attaches Heat Riser To Air Cleaner) This kit is used to connect a heat riser tube to the stock air cleaner assembly. This kit can be used on any header with 1.5" primary tubes. Kit Includes: (3) Hose clamps (1) 1.5″ Standoff (1)...$76.43 -
ARB Snatch Strap Specifically designed to stretch under load for maximum performance, an ARB snatch strap is a very effective method of extracting a bogged or immobilized 4Ã-4 when a second vehicle is present. The unique design of the strap allows...$75.65 -
Panhard Link Frame Bracket (Front 3-Link) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a 3-Link or 4-Link system...$75.35 -
22" Slide-n-Lock Tie Down System The Slide-N-Lock Tie Down System is the ultimate way to secure any type of payload! With self-locating holes placed every 5″, you can position the spring-loaded locking pins where you need them in seconds, making this...$75.14 -
Power Steering Pump Pulley (V-Belt) This pulley is designed to fit our standard or full hydraulic power steering pumps. NOTE: Not designed for the stock pump. This product should not be used in a manner that violates Federal EPA Laws. Contact...$75.00 -
Leafspring Bumpstops (w/ Extensions) Bumpstops are used to prevent over-flexing of leaf springs and shocks. Bumpstops can be bolted or welded in place. We recommend welding bumpstops to top of the u-bolt flip kit plate. Bumpstops are 2" wide by 5 1/4"...$74.62
-
fast shipping
Speed Delivery