5VZ Runner Kits for Tacoma/4Runner (V6 - 3.4L)

Toyota's 5VZ (3.4L) V6-cylinder engine now has the option for an Intake Manifold Spacer Kit offered by Anderson Engine Solutions. This Toyota Tacoma/4Runner intake manifold runner is an aftermarket "bolt-on" item without major modification to the engine.

Features:

• Direct fit to OEM air box/plenum or compatible to aftermarket cold air intake system.
• 6 Port CNC machined runner Delrin (POM-C) 1.00" thick
• OEM Toyota Intake Gaskets with the kit for proper sealing.
• 20 + Count Additional Hardware
• 1/4" Steel brackets formed by CNC hydraulic press (ASTM Spec. A-569) for Intake support
• 2 EGR mounting flanges with OEM gaskets.

What are the advantages of Delrin (POM-H)

• Temperature resistance (up to 250F max)
• Prevents excessive heat transfer
• High Material Stiffness
• Low Friction & Wear
• Fatigue Resistant
• Chemical Resistant
• Dimensional Stable
• Low moisture absorption

After installation, the additional length of the intake port air flow path allows for the 5VZ engine to reach max torque at a lower engine speed. This decreases the need to operate the vehicle at higher RPMs to achieve a max engine performance and increases drivability of the truck overall while promoting better low end torque/mileage per gallon (MPG)

NOTE: This is not C.A.R.B. approved. Minor things such as untapping the wiring harness make be needed during assembly. Will not fit with supercharger installed.

Contact our Tech Support Line for further information at 928-855-6341.