H.D. Extra-Flex Extended Front Leaf Springs

(5” Lift)

Now the front 5" springs are available in a heavy duty version with a 25% higher spring rate. These have an additional 7th leaf and the length of the leaves has been readjusted to match. If you are running a larger V-6 or V-8 motor, you will appreciate the extra weight carrying capacity of these springs. Trail-Gear leaf springs are flexible on the trail yet hold their lift year after year.

Features:

• Springs are pre cycled and lot tested to maintain quality
• Nylon pads between the leaves reduce noise and allow springs to flex more easily
• Raised clamp assemblies prevent binding of the leafs within the pack
• Dual-pass shot-peened to relive material stress
• Our front springs feature a full military wrap on the front
• Spring rate is 220 lbs per inch
• Leaf pack contains (6) leaves
• Springs are 47" long as measured along the top leaf
• New poly bushings and left side spring pad are included with springs

NOTE: Pin to center of front mount is 22" and pin to the center of the shackle mount is 25". 2 1/4" width springs. Requires the use of U-bolt flip kit, see Part #: 2053165 (79-83), or 2053169 (84-85), and a spring hanger kit, see Part #: 2053100.

Contact our Tech Support Line for further information at 928-855-6341.