Gear Install Kits & Accesories

Master Install Kit These parts are getting hard to find so get the whole kit to have a successful install. Kit Includes: Carrier Bearings (2), see Part #: 1091222 Pinion Bearing Retainer Shims, see Part #: 1091227 Rear Pinion Bearing, see Part #: ...

LCE Differential Breather Kit A differential / axle breather serves the important purpose on a 4WD vehicle of venting the air pressure in drivetrain assemblies such as the differentials, transmission and transfer case. Under normal operations, these...

Carrier Bearing & Race Kit (4WD and V6 only) This is a premium bearing Koyo, and are the best quality replacement for your worn out or damaged carrier bearings. NOTE: Sold individually, (2) required per differential. Contact our Tech...

Axle Breather Relocation Kit This Breather Relocation Kit was specifically designed to relocate your rear axle breather when welding up a rear axle gusset or any type of mount or bracket. This kit uses our Creeper Breather to keep any dirt, mud, or...

Carrier Bearing This is a premium bearing we get directly from Toyota, and are the best quality replacement for your worn out or damaged carrier bearings. OEM Toyota Part #: 90368-45002 NOTE: Sold individually, (2) required per differential...

Differential Stud Eliminator Kit When you come home after a trail ride, do you see oil leaking from the center of your axle housings? The stock axle housing studs may be pulling loose. No longer do you have to tap and drill the studs out and replace...

27 Spline Transfer Case Triple Drilled Flange (w/ Dust Cover) Has all the common 1984-1995 patterns in one, universal output flange. Includes 4cyl CV and Non CV patterns as well as V6 CV pattern. Makes sourcing and reversing drive lines much easier...

27 Spline Transfer Case Triple Drilled Flange (w/ Dust Shield) Has all the common 1984-1995 patterns in one, universal output flange. Includes 4cyl CV and Non CV patterns as well as V6 CV pattern. Makes sourcing and reversing drive lines much easier...

27 Spline Drive Shaft Triple Drilled Flange (w/o Dust Cover) Has all the common 1984-1995 patterns in one, universal output flange. Includes 4cyl CV and Non CV patterns as well as V6 CV pattern. Makes sourcing and reversing drive lines much easier...

Solid Pinion Spacer (High Pinion) Solid pinion spacers prevent loosening of the gear setup preload. Originally designed for older Toyota applications, Toyota stopped using them decades ago. Solid spacer and shims replace the crush sleeve. It takes a...

Mini Install Kit This mini install kit covers your basic installation requirements. Kit Includes: Crush Collar Rear Pinion Seal Pumpkin Gasket Shim Kit Contact our Tech Support Line for further information at 928-575-2174. Note:...

Pinion Head Bearing The 6.7" Toyota differential is becoming increasingly more difficult to find parts for. Fortunately, LC Engineering has come to the rescue with some replacement parts for these Celica rear ends. This is the bearing that rides on the...