Valve Accessories

Valve Keepers It is recommended to use hardened valve keepers every time you re-build your engine. LC Engineering carries hardened valve keepers for all 3VZ valves using stock Toyota retainers or Street Performer retainers. A must for any high RPM...

Street Valve Shim (Stock Bucket / 2.50mm - 2.85mm) Street valve shims are used to shim the valve lash to obtain the proper valve lash specification that is required for the appropriate camshaft grind. On 2RZ and 3RZ engines, the cam rides directly on...

Street Valve Shim (Stock Bucket / 2.90mm - 3.30mm) Street valve shims are used to shim the valve lash to obtain the proper valve lash specification that is required for the appropriate camshaft grind. On 2RZ and 3RZ engines, the cam rides directly on...

Valve Shim (2.20mm - 2.55mm) Street valve shims are used to shim the valve lash to obtain the proper valve lash specification that is required for the appropriate camshaft grind. On 3VZ engines, the cam rides directly on the shim on stock buckets. Our...

Valve Shim (2.60mm - 2.95mm) Street valve shims are used to shim the valve lash to obtain the proper valve lash specification that is required for the appropriate camshaft grind. On 3VZ engines, the cam rides directly on the shim on stock buckets. Our...

Valve Shim (3.00mm - 3.40mm) Street valve shims are used to shim the valve lash to obtain the proper valve lash specification that is required for the appropriate camshaft grind. On 3VZ engines, the cam rides directly on the shim on stock buckets. Our...

Pro Chromoly Retainer (Dual Spring) For hot street motors or moderate race motors, the Chromoly retainers fit the bill nicely. Use these with our dual valve springs for proper valvetrain control up to 6,000 RPM. These retainers are substantially...

Pro Bronze Valve Guide Valve Guides are made of the highest quality manganese bronze material available. This provides additional clearance between retainer and seal for increased valve lift. Valve Guides provide excellent stability so they can be run...

Pro Bronze Valve Guide (Exhaust Side) Valve Guides are made of the highest quality manganese bronze material available. This provides additional clearance between the retainer and seal for increased valve lift. Valve Guides provide excellent stability...

Viton Valve Seals (Stock Guides) Viton Valve Seals are the latest in valve seal material, surpassing Teflon! Heat resistant to 440 degrees, they eliminate oil consumption through the valve guide and provide smoother engine idling by stopping manifold...

Street Performer Retainer (Single Spring) Our Street Performer Retainers are an excellent OEM replacement that matches our street performer valve springs perfectly. If you have a mild street motor that doesn't need anything exotic in the valvetrain,...

Pro Valve Shim (8mm Under Bucket / 1.45mm - 1.80mm) LC Engineering upgraded cam buckets re-locate the valve shim from the top of the bucket to underneath the bucket. When the shims get re-located, you will have to change the shim to these under bucket...