-
Throttle Body Gasket Throttle body gaskets can be a source of hard-to-find vacuum leaks if the throttle body is removed or disrupted. Any time you remove your throttle body, you should replace the gasket while you're at it. This is a stock replacement...$2.57 -
Dowel Pin (Aligns Cylinder Head To Block) When installing a new head on your 20R, 22R or 22RE, these dowel pins can make head gasket alignment much easier. by installing these in the block, the gasket and cylinder head all fit snugly and perfectly...$2.52 -
Brake Line Clip This is the OE clip that holds the female side of the brake line into the mounting bracket (sold each). OEM Toyota Part #: 90468-A0007 Contact our Tech Support Line for further information at 928-575-2174. Note: Images...$2.29 -
OEM Vent Hose Spring Clamp Need to connect the vent hose and secure it properly? Simply get these spring clips into place, and release. Nothing makes a job easier than having proper fitting replacement parts. Look no further, LC has you covered. OEM...$2.14 -
Holley Base Gasket Avoid annoying vacuum leaks and replace the gasket any time you remove the carburetor from the intake. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes...$2.11 -
Idle Jet Holder O-Ring These O-Rings seal the idle jet holder to the main carburetor housing. O-Rings can become brittle with age and cause annoying (and dangerous) fuel leaks. NOTE: O-Rings sold individually. Contact our Tech Support Line for...$2.11 -
Spring Seat Shim (Single Spring / .025″) Hardened Valve Spring Shims for 2RZ and 3RZ Street Performer Valve Springs. NOTE: Sold individually. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...$2.10 -
Fuel Injector O-Rings Located on the fuel rail end of the injectors. LC Engineering suggests changing these when rebuilding or servicing the engine or the manifold assembly. LC Engineering flow-matched fuel injectors include new o-rings in the kit...$2.09 -
Valve Keeper It is recommended to use hardened valve keepers every time you rebuild your engine. LC Engineering carries hardened valve keepers for all 3VZ valves using stock Toyota retainers or Street Performer retainers. A must for any high RPM...$2.09 -
Monster 4Runner Vinyl Decal (5.5″ x 4″) Decals increase horsepower! Not really, but you can show the person behind you why you're in front! New limited edition old school Toyota decals. Contact our Tech Support Line for further information at...$2.07 -
Manifold Adapter Gasket (Air Injection Manifold) This gasket goes between the air injection adapter and the air injection tube. Exhaust leaks can be annoying, replace the gaskets any time the seal is broken. Steel impregnated carbon material. NOTE:...$2.05 -
Exhaust Collector Gasket (2 1/4" / 3 Bolt) If you plan to connect your header to the rest of your exhaust, you will need a collector gasket. OEM gaskets feature a carbon material and stainless steel fire ring for a long life and a positive seal. 3-bolt...$2.03
-
fast shipping
Speed Delivery