-
Garrett T3 Exhaust Discharge Flange (4-Bolt) Use 2.5" OD tubing in the groove or 3" OD tubing outside the groove. 3" OD is tight near the bolt holes but works fine so you're not limited to a 2.5" downpipe. Contact our Tech Support Line for...$24.84 -
Rear Seal Gasket Assembly High-quality silicone seals with a double lip for improved sealing, includes rear main seal & housing gasket. Contact our Tech Support Line for further information at 928-575-2174. Note:...$24.82 -
Aluminized Heat Sheath (1.25" x 3') This aluminized sleeving reflects heat from wiring and hoses. Heat Sheath is easily cut to length. For use on cars, street rods, and trucks. This product should not be used in a manner that violates Federal EPA...$24.82 -
Micro Activation Switch & Bracket This micro-switch and bracket enables performance enthusiasts to activate solenoids, fuel pumps, and most anything else. A micro throttle switch can be used as either the primary method of activating a Nitrous...$24.57 -
Piston Ring Installation Pliers This deluxe piston ring expander will support the ring all the way around. This will help in not distorting the ring and cut down on breakage. This tool will save time and money. Contact our Tech Support Line for...$23.94 -
Trail Shovel (Recovery & Utility) The Recovery Utility Tool (RUT) is a fully functional collapsible Military Style shovel with easy grip and light handle with carbon steel blade that is heat treated for high strength and features double serrated...$23.78 -
Hall Sensor Mount This bracket is needed if you are installing our Pro Fuel Injection Systems on a 22RE engine. This mount will locate the Hall sensor in the right location for both the stock pulley and the LC Engineering underdrive pulley. This...$23.51 -
OEM Bell Housing to Block Bolt Set After many years of sitting in your engine compartment, the bell housing bolts might not be in the best shape, especially if you've had the engine or trans out a few times. Instead of scrambling to replace a bolt or...$23.51 -
Coolant Temp Sensor Connector This coolant temperature sensor connector is a replacement for 1989-1995 22RE applications. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes...$23.51 -
Shim Pack (Six Shooter Knuckle) Shim pack for 6-shooter knuckles. In order to maintain proper steering geometry and prevent binding or mis-alignment, we offer this assortment of shims. Contact our Tech Support Line for further information at...$23.45 -
PCV Hose This is the OEM 22RE PCV hose for the PCV Valve on top of the valve cover. OEM Toyota Part #: 12261-35011 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...$23.23 -
Temperature Gauge Sender This Temperature Gauge Sender is a stock replacement for 22RE engines. After years of use, electric components can go bad and give false readings, that is why we recommend replacing them with new ones, for accurate readings...$22.86
-
fast shipping
Speed Delivery