• Heater Tube O-Ring (Under EFI Manifold) The O-ring seals the heater tube under the EFI intake manifold. Over time O-rings become brittle and break. Replace a leaky or corroded O-rings before severe damage occurs. This is OEM toyota part and may not...
    $5.85
  • Turbo Compressor Outlet Gasket (CT20) This is a replacement for the OEM turbo compressor outlet gasket for 22RET engines with the CT20 Turbo. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line...
    $5.70
  • Hub Outer Dial O-Ring (Aisin Manual Hubs) There is a small rubber O-ring located between the inner and outer hub dials. If this ring becomes damaged water and dust can leak into the hubs. It can also make turning the dial difficult. Easy to install...
    $5.55
  • Caliper Bolt This bolt is the perfect replacement to bolt your caliper to the spindle. After years of service, these bolts can end up stripped or damaged. This is just one of the many parts we carry for brake hardware. Contact our Tech Support...
    $5.47
  • Drive Shaft Bolt Replacement drive shaft bolts, nuts and washers. Bolts include factory thread lock adhesive already applied to threads. NOTE: Sold individually. See Part #: 2053170 for drive shaft bolt lock washer and Part #: 2053172 for the drive...
    $5.47
  • Acorn Style Lug Nut Replacement Acorn Style lug nut (M12 X 1.50 thread pitch). NOTE: Sold individually. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further information at...
    $5.47
  • 8" Pinion & Transfer Case Flange Nut The flange nuts are recommended to be staked or peened over to lock so they are not considered reusable. This stock replacement nut is used on the 8" pinion in the rear 1979-2002 and most transfer case flanges...
    $5.47
  • Clutch Alignment Tool Used to align splines of disc to pilot bearing for a clutch install. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent...
    $5.36

LCE Performance caters to the distinct needs of Toyota pickup owners from the 1983-1988 era, a period that witnessed the evolution of these trucks into iconic symbols of reliability and versatility. Committed to enhancing the performance and longevity of these vehicles, LCE Performance offers an extensive selection of 1983-1988 Toyota pickup parts tailored to meet the demands of enthusiasts.


For engine upgrades, LCE Performance provides components such as high-performance camshafts, cylinder heads, and exhaust systems, allowing owners to unleash the full potential of their Toyota pickups. Carburetor kits further contribute to optimizing air and fuel delivery, offering improved power and efficiency for these classic trucks.


In the realm of suspension and handling, LCE Performance offers lift kits and shocks designed to elevate the off-road capabilities and overall driving experience of 1983-1988 Toyota pickups. Drivetrain components, including clutches and differentials, are also available, enabling owners to customize their trucks for specific performance needs.


With a commitment to quality and precision engineering, LCE Performance stands as a reliable source for enthusiasts seeking to restore, modify, or upgrade their 1983-1988 Toyota pickups, ensuring these iconic vehicles continue to thrive on and off the road.