Transfer Case Rebuild Kit (Major) This kit contains all the bearings and gaskets to do a rebuild on the Transfer Case. This is classified as a “Major″ overhaul kit. Kit Includes: Gaskets Seals Transfer Case Bearings & Roller Bearings...

Transfer Case Rebuild Kit (Minor) This kit contains all the bearings and gaskets to do a rebuild on the Transfer Case. This is classified as a “Minor″ overhaul kit. Kit Includes: Gaskets Seals Transfer Case Bearings (SKF, NSK, NACHI and...

Top Shift T-Case Conversion (Kit A) Need to convert a forward shift case to top shift? We have a great kit that will get the job done. Our kit is made with ALL new parts, and is already machined to accept a 4.7 input gear. Kit Includes: 2 Shift...

Top Shift T-Case Conversion (Kit B) When doing a top shift conversion on a forward shift T case, you will need a block off plate to block off the old (unused) hole in the transmission that the forward shift shifter was in. In addition to that you will...

Top Shift T-Case Conversion (Kit C) When doing a top shift conversion on a forward shift T case, you will need a block off plate to block off the old (unused) hole in the transmission that the forward shift shifter was in. In addition to that you will...

Transfer Case Shifter Boot (OEM) It's common for the factory transfer case boot to degrade over time, crumble and disintegrate. This often results in dirt and mud getting into the transfer case shifter then into the transfer case. This simple Factory...

Creepy Twin T-Case Shifter (Top Shift) Twin stick shifters allow independent control of the high/low and 2wd/4wd sections of your Toyota gear driven transfer case. This allows access to low range 2wd operation. It also allows you to shift in and out of...

Creepy Twin T-Case Shifter (Forward Shift) Twin stick shifters allow independent control of the high/low and 2wd/4wd sections of your Toyota gear driven transfer case. This allows access to low range 2wd operation. It also allows you to shift in and...

Stick Shift Boot (Twin T-case) This boot is designed to work with our Creepy Twin T-Case shifter (above). It features a flexible rubber shell with a steel bottom plate for mounting to your floor board. Great for keeping engine heat and smell out of the...

Adapter Plate This adapter plate allows one or more gear driven transfer case(s) to be bolted up to 1988-1995 Toyota 3.0L V6 5 speed transmissions. Our updated design does not require modification to the transmission for installation thanks to the use...

Shift Detent Bolt (Heavy Duty Transfer Case) The stock transfer case shift springs tend to give a sloppy feel to the shifters and can lead to the transfer case shift lever popping out of gear on the trail. We recommend heavy duty shift springs be used...

Transfer Case Shifter w/ Knob If you are going for the multiple transfer cases setup, you will need shifters too! Great replacement for your old or broken Toyota stock shifter. NOTE: Does not include shifter base, for shifter base (Top Shift), see...