-
Fuel Pressure Safety Switch Use this (5 Psi) fuel pressure safety switch (normally open) to control your car's fuel pressure and avoid the risk of shooting nitrous with too little pressure to supply the extra fuel required. You don't want to be...$82.29 -
Standard Bottle Heater NOS systems are calibrated for optimum performance with a bottle pressure of 900- 950 psi. The pressure will change with temperature. Heater kits are thermostatically controlled to keep the bottle at 85 F. Powered by 12 Volt DC...$254.36 -
Nitrous Bottle Blanket (7" Diameter) Insulating the bottle helps maintain pressure by keeping heat in the bottle when it's cold, or heat out when it's hot outside. The blankets are made of rugged, easily cleaned Nylon outer shell with insulation. It's...$70.27 -
Intercooler Spray Bar This Intercooler spray bar has a new snake design delivers 20% greater intercooler coverage area for improved cooling. Decreases intake air temperatures by 20 degrees F and allows you to safely run more boost for more power. Cut...$281.14 -
10 oz. Standard Bottle Bracket NOS brackets are designed to securely hold your Nitrous bottle at the proper angle for maximum flow through the siphon tube. Standard brackets available made of steel with black vinyl coating. Contact our Tech...$101.03 -
1.5" Lug Centric Wheel Spacers (Spidertrax) Spidertrax has been providing the off-road market with quality wheel spacers since 1999. With their vehicle specific designs, aluminum anodizing for critical corrosion resistance, and their unmatched...$182.32 -
Lower Shock Mounts These shock mounts are designed to weld directly onto the axle housing. These mounts can be used on front or rear axle applications. Made from 3/16" plate steel. Mounts have curved bottoms that can be mounted horizontally or...$43.00 -
Johnny Joint 1.25" Rod End (Right Threaded) Forged Johnny Joint® rod ends feature forged steel construction, a 1 1/4"-12 right hand threaded shank and come fully assembled with our standard Johnny Joint internals (2.625" wide ball center with a...$82.35 -
Johnny Joint Jam Nut (Right Threaded) These jam nuts are good to have if you spend a lot of time working on your rock crawler suspension. These jam nuts tighten against the rod ends to keep them from loosening. 1 1/4"-12 right hand thread jam nut for...$7.17 -
Leafspring Bumpstops Bump Stops are used to prevent over-flexing of leaf springs and shocks. Bumpstops can be bolted or welded in place. We recommend welding bumpstops to top of the u-bolt flip kit plate. NOTE: Bump Stops are 2" wide by 5 1/4" long...$50.00 -
Leafspring Bumpstops (w/ Extensions) Bumpstops are used to prevent over-flexing of leaf springs and shocks. Bumpstops can be bolted or welded in place. We recommend welding bumpstops to top of the u-bolt flip kit plate. Bumpstops are 2" wide by 5 1/4"...$74.62 -
Leafspring Bumpstop Extensions When installing leaf springs it's important to have bumpstops to limit how far the leaf springs compress. These easy to weld on extensions make installing bumpstops quick and easy. Extensions weld directly to the frame...$39.18
-
fast shipping
Speed Delivery