-
12" Flag / Checker Decal (LC Engineering) Decals increase horsepower! Not really, but you can show the person behind you why you're in front! Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...$2.06 -
U Bend (6″ Radius) Use these 3" U-Bends for building your own headers or replacing a bent or damaged tube. NOTE: Size listed is the outside diameter. Constructed of mild steel. Contact our Tech Support Line for further information at...$46.85 -
Brake Line Clip This is the OE clip that holds the female side of the brake line into the mounting bracket (sold each). OEM Toyota Part #: 90468-A0007 Contact our Tech Support Line for further information at 928-575-2174. Note: Images...$2.29 -
3mm Allen Wrench (Ball Head) This 3mm allen wrench is used mainly for our TPS screw upgrade kit. The ball end of the wrench allows off angle access to the TPS screws. This makes adjusting the TPS a lot easier if you are doing it in the vehicle. NOTE:...$8.19 -
Fuel Pressure Gauge "T" Fitting (5/16" Hose to 1/8" NPT) This fitting makes installing your fuel pressure gauge much easier. The fitting has an 1/8"npt "T" fitting along with two 5/16" hose barbs. This will allow you to install your fuel pressure...$15.45 -
Front Shock Hoops The Universal Shock Hoop Kit is long enough to accommodate a 14" shock, but not so long that you cannot use a 12" shock. The shock hoops are made out of 1035 DOM and are precision CNC bent to ensure the highest quality product. From...$123.13 -
Residual Valve (2 PSI) When converting your rear drum brakes to disc you will need to hold pressure on the rear line to keep the pads in contact with the rotors. If you don't then you will have to pump your pedal to get a firm brake feel. This residual...$32.39 -
Wastegate Block Off Plate (CNC Turbo Manifold) This block off plate goes under the CNC Turbo manifold (2) Bolt Style. 3/8" thick Ceramic Coated to handle the heat from our CNC turbo manifold. Contact our Tech Support Line for further information...$25.90 -
Heavy Duty Sway Bar Links This is a set of very heavy duty Tundra/Sequoia front sway bar links. The stock links break because they are too frail, and because they bind in the end of the sway bar. These links include extremely thick wall tubing, larger...$99.13 -
Garrett T3 Exhaust Discharge Flange (4-Bolt) Use 2.5" OD tubing in the groove or 3" OD tubing outside the groove. 3" OD is tight near the bolt holes but works fine so you're not limited to a 2.5" downpipe. Contact our Tech Support Line for...$24.84 -
K&N 63 Series F.I.P.K. (63-9031-1) A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable,...$432.59 -
K&N 63 Series F.I.P.K. (63-9027) The K&N AirCharger 63-9027 air intake system replaces your vehicle’s restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and...$454.22
-
fast shipping
Speed Delivery