LCE Front U-Bolt Flip Kit (1979-1985 Pickup / 1984-1985 4Runner) Introducing another addition to our lineup that you've all been eagerly awaiting! If you've been keeping tabs on our Project 85' build, you might have spotted our specially designed...

Power Steering Hose Conversion Kit When installing a SAS kit on your Tacoma, the rack and pinion has to be removed and replaced, usually with an 86-95 Toyota IFS power steering box. Trail-Gear has developed a Power Steering Hose Conversion kit that...

Trail-Link Three Front 3-Link Bracket (Panhard / Axle) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a 3-Link or...

Front Leaf Spring Hanger This hanger is used to as a front mount for our 47" front leaf springs. Hanger is included in IFS Eliminator and Classic Lift kits. NOTE: Kit does not include bolts and bushings . This product should not be used in a...

Front 3-Link Lower Link Frame Bracket (You Choose Side) Individual Trail-Link Three™ Front 3-Link parts. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may...

LCE Rear U-Bolt Flip Kit (1979-1995 Pickup / 1984-1995 4Runner) Introducing another addition to our lineup that you've all been eagerly awaiting! If you've been keeping tabs on our Project 85' build, you might have spotted our specially designed...

Rear Non-Grease Shackles (+2" Lift) Made out of 3/8" thick steel plates, these shackles install easily to provide rear (2″) suspension lift while delivering performance demanded by offroading. Kit Includes: (2) Shackles (7) Bolts (6) Nylock...

38 1/4" Drag Link The Tacoma Drag Link is 38 1/4" long and works with our Rock Assault™ Left-Hand Drop Front Axle Housing with 59" WMS to WMS. This drag link is made from .250" wall DOM 1.25" tubing, precision tapped, and features a left side thread...

Body Mount Bushings These suspension bushings replace distorted and worn-out original rubber mounts to maintain truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off! And...

Rear Control & Track Arm Bushings These bushings maintain proper alignment under extreme conditions on and off-road and during competition. Helps provide quicker steering response and greater vehicle control. Whatever your demands, proper alignment...

Front Leaf Spring Hanger (W/ Options) This hanger is used to as a front mount for our 47" front leaf springs. Hanger is included in IFS Eliminator and Classic Lift kits. Contact our Tech Support Line for further information at 928-575-2174...

Front Shock Hoops The Universal Shock Hoop Kit is long enough to accommodate a 14" shock, but not so long that you cannot use a 12" shock. The shock hoops are made out of 1035 DOM and are precision CNC bent to ensure the highest quality product. From...