Suspension Lift & Lower Components

Leafspring Bumpstops (w/ Extensions) Bumpstops are used to prevent over-flexing of leaf springs and shocks. Bumpstops can be bolted or welded in place. We recommend welding bumpstops to top of the u-bolt flip kit plate. Bumpstops are 2" wide by 5 1/4"...

Creeper Joints (Choose Your Size) These heavy duty rod ends are ideal for today's flexible suspension systems. Super strong, Creeper Joints will hold up to years of punishment. The outer shell is a single forged piece. The inner flex ball is made from...

Firewall Kit When doing a solid axle conversion on a Tacoma, you are required to remove the OEM rack and pinion steering system, which leaves a large hole in your firewall. Our Tacoma firewall plate fills that hole and bolts into the OEM fastener...

Driveline Spacer 1.5" (Longfield) Is your driveline too short after you do a lift? We have 1 inch and 1.5-inch spacers with bolts. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration...

Driveline Spacer 1" (Longfield) Is your driveline too short after you do a lift? We have 1 inch and 1.5-inch spacers with bolts. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration...

Upper Link Axle Bracket (3-Link / Front) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a 3-Link or 4-Link system...

Differential Drop Spacer Kit (Rear Sway Bar) Reduce body roll, understeer, and generally sloppy handling with one of these Addco anti-sway bar kits. The bar is made from high-carbon steel and is hardened and stress-relieved to give your suspension...

Differential Drop Spacer Kit Lifting a Tacoma, Tundra, Sequoia or 4Runner increases the angles on the CV joints and boots, which accelerates wear. These solid aircraft-grade 6061-T6 aluminum spacers and zinc-plated Grade 8 hardware move the front...

Leafspring Bumpstops Bump Stops are used to prevent over-flexing of leaf springs and shocks. Bumpstops can be bolted or welded in place. We recommend welding bumpstops to top of the u-bolt flip kit plate. NOTE: Bump Stops are 2" wide by 5 1/4" long...

Toytec 7.5" U-Bolt Set Features: Longer U-Bolts for lift blocks or springs. Will also work with stock springs. High quality Zinc Plated Steel. Can be cut to length. Complete with hardware as Shown. NOTE: If your truck has 3.25" ID rear U-bolts,...

Toytec 9" U-Bolt Set Features: Longer U-Bolts for lift blocks or springs. Will also work with stock springs. High quality Zinc Plated Steel. Can be cut to length. Complete with hardware as Shown. NOTE: If your truck has 3.25" ID rear U-bolts, this...

Sway Bar Relocation Bracket (ReadyLIFT) The thick CNC machined link body design incorporates left and right turn heim end links that allow for easy adjustment, even in a moment's notice should you feel the need to adjust the sway bar setting. We...