38 1/4" Drag Link The Tacoma Drag Link is 38 1/4" long and works with our Rock Assault™ Left-Hand Drop Front Axle Housing with 59" WMS to WMS. This drag link is made from .250" wall DOM 1.25" tubing, precision tapped, and features a left side thread...

Power Steering Hose Conversion Kit When installing a SAS kit on your Tacoma, the rack and pinion has to be removed and replaced, usually with an 86-95 Toyota IFS power steering box. Trail-Gear has developed a Power Steering Hose Conversion kit that...

Power Steering Hose Conversion Kit When installing a SAS kit on your Tacoma, the rack and pinion has to be removed and replaced, usually with an 86-95 Toyota IFS power steering box. Trail-Gear has developed a Power Steering Hose Conversion kit that...

Firewall Kit When doing a solid axle conversion on a Tacoma, you are required to remove the OEM rack and pinion steering system, which leaves a large hole in your firewall. Our Tacoma firewall plate fills that hole and bolts into the OEM fastener...

Front Shackle Kit Hanging leaf springs from your Tacoma can be very difficult, especially when it comes to the shackles. The frame is thin and there are not many complete shackle kits available on the market, while the kits that are available are...

Brake Proportioning Valve Relocation Bracket Kit When you lift a Tacoma or Tundra, the Brake Proportioning Valve no longer senses loads properly and can cause a potentially dangerous braking situation. This kit relocates the Brake Proportioning Valve...

Driveline Spacer 1.5" (Longfield) Is your driveline too short after you do a lift? We have 1 inch and 1.5-inch spacers with bolts. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration...

Driveline Spacer 1" (Longfield) Is your driveline too short after you do a lift? We have 1 inch and 1.5-inch spacers with bolts. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration...