Trail Safe Pinion Seal Tired of dealing with oil leaks from your pinion gear? Trail-Gear has remedied that issue by offering our new Trail-Safe™ Pinion Seal. The Trail Safe™ Pinion seal lip is totally supported by a garter spring applying constant...

Merge Collector (3-1 1/2″ into 1-2 ¼″) You've got that header all constructed, now you just need a collector to tie it all together. LC Engineering has already done the work for you, just pick the one for your application, slip it on, and weld it...

Black Silicone Adapter (2" to 2.75") Our silicone hose is the high performance choice for vacuum hose! Dress up your engine compartment by replacing your vacuum lines with the highest quality silicone hose available! Full vacuum through the following...

2" ID Silicone Elbow (90º / Black) Our silicone hose is the high performance choice for vacuum hose! Dress up your engine compartment by replacing your vacuum lines with the highest quality silicone hose available! Full vacuum through the following...

Valve Cover Hardware Kit Valve cover hardware kit includes (4) studs and (4) chrome acorn nuts, for the 20R/22R/RE (all years). We also use the studs in this kit for mounting 1" spacers to adapters, nuts are not used. This product should not be used...

2.75" ID Silicone Elbow (45º / Black) Our silicone hose is the high performance choice for Turbo Intercooler or Air! Dress up your engine compartment by replacing your air lines with the highest quality silicone hose available! Full vacuum through the...

Seal Saver (Rear Main) Do you have a pesky oil leak coming from the rear main seal? Don't just keep swapping out rear main seals. LC Engineering carries this seal saver that slides right over the rear hub of the crank and rides between the crank and...

Silicone Adapter (2" to 2.5") Our silicone hose is the high performance choice for vacuum hose! Dress up your engine compartment by replacing your vacuum lines with the highest quality silicone hose available! Full vacuum through the following...

Non-Stick Bowl Gasket Set These Holley fuel bowl gaskets are designed to replace your standard fuel bowl gaskets. They transform jet changing into an easy process with no worries of ripped gaskets. Contact our Tech Support Line for further...

Header Stud Set The factory exhaust manifold studs have a shoulder in the center that can interfere with proper header tightening. Our 10mm x 1.25 x 48mm long, heat-treated plated header mounting studs are stronger than stock. Works with a stock...

Turbo Oil Drain Plate (1/2" NPT Boss / Turbo Side) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This drain plate mounts to the bottom of the turbo and gives you a 1/2" NPT bung to...

T3 Turbo Discharge Gasket (4 Bolt) Stainless Steel T3 Discharge Gasket. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further information at 928-575-2174. Check out ...