H4 Headlight Conversion Kit 1982-1995 Pickup & 1984-1991 4Runner

Update your dim stock headlight bulbs to a set of Rampage H4 Conversion Headlights that are a direct replacement, 60% more luminescence and D.O.T. approved. This is a simple 10 minute installation that requires only a screwdriver and the results will be incredible. Kit includes a pair of durable die-cast aluminum housings with solid clear glass lens and 2-H4 55/60W Bulbs. Imagine a whole new brighter nighttime driving experience that’s safer and less fatiguing.

Will NOT fit turbo models without modification to the vehicle

Contact our Tech Support Line for further information at 928-855-6341. Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

(47)

H4 Headlight Conversion Kit 1979-1981 Pickup, 1969-1987 FJ40 & FJ60

Update your dim stock headlight bulbs to a set of Rampage H4 Conversion Headlights that are a direct replacement, 60% more luminescence and D.O.T. approved. This is a simple 10 minute installation that requires only a screwdriver and the results will be incredible. Kit includes a pair of durable die-cast aluminum housings with solid clear glass lens and 2-H4 55/60W Bulbs. Imagine a whole new brighter nighttime driving experience that’s safer and less fatiguing.

Contact our Tech Support Line for further information at 928-855-6341. Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

(2)

Black Headlight Set

1997-2000 Tacoma

CG is the answer for all of your performance lighting needs. With over 30 years of manufacturing experience, they surpass all competition in quality, innovative styling and product offerings. We at LCE are dedicated to providing great service and superior customer support through an experienced sales team and a knowledgeable technical staff.

LCE offers the best quality performance lighting products at an affordable cost. All CG products are SAE and D.O.T. compliant to FMVSS No. 108; and manufactured in our state-of-the-art ISO 9002 and QS 9000 quality certified factory. All CG lighting products are designed using CAD/CAM computerized equipment and these modern designs are then tested using 3-dimensional testing machine to insure precision and accuracy in the research, development and design of their molds.

In order to affirm resilience and durability, they rigorously test every CG lighting product in a Thermo-Hygrometer (temperature and humidity chamber) and a Rain-Resistant Tester. In addition , they thoroughly expose all of their products to intense photometric testing to assure strict compliance with local, state, federal and international standards. All CG products go through strict testing for durability, impact strength, as well as fresh/salt water, dust/dirt resistance.

In order to comply with safety regulations, all CG products must pass all quality inspections. After all safety checks and quality assurance, products are manufactured using the most advanced technological and economical methods available. Single, double, and triple shot injection machines produce our semi-finished products. After undergoing vacuum electro-plating or spray plating processes, products are combined through hot press bonding, friction bonding, or an automatic assembly line spin coater.

Contact our Tech Support Line for further information at 928-855-6341. Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

(1)

Chrome Headlight Set

1997-2000 Tacoma

CG is the answer for all of your performance lighting needs. With over 30 years of manufacturing experience, they surpass all competition in quality, innovative styling and product offerings. We at LCE are dedicated to providing great service and superior customer support through an experienced sales team and a knowledgeable technical staff.

LCE offers the best quality performance lighting products at an affordable cost. All CG products are SAE and D.O.T. compliant to FMVSS No. 108; and manufactured in our state-of-the-art ISO 9002 and QS 9000 quality certified factory. All CG lighting products are designed using CAD/CAM computerized equipment and these modern designs are then tested using 3-dimensional testing machine to insure precision and accuracy in the research, development and design of their molds.

In order to affirm resilience and durability, they rigorously test every CG lighting product in a Thermo-Hygrometer (temperature and humidity chamber) and a Rain-Resistant Tester. In addition , they thoroughly expose all of their products to intense photometric testing to assure strict compliance with local, state, federal and international standards. All CG products go through strict testing for durability, impact strength, as well as fresh/salt water, dust/dirt resistance.

In order to comply with safety regulations, all CG products must pass all quality inspections. After all safety checks and quality assurance, products are manufactured using the most advanced technological and economical methods available. Single, double, and triple shot injection machines produce our semi-finished products. After undergoing vacuum electro-plating or spray plating processes, products are combined through hot press bonding, friction bonding, or an automatic assembly line spin coater.

Contact our Tech Support Line for further information at 928-855-6341. Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Headlight Set For 1999-2002 4Runner

CG is the answer for all of your performance lighting needs. With over 30 years of manufacturing experience, they surpass all competition in quality, innovative styling and product offerings. We at LCE are dedicated to providing great service and superior customer support through an experienced sales team and a knowledgeable technical staff.

LCE offers the best quality performance lighting products at an affordable cost. All CG products are SAE and D.O.T. compliant to FMVSS No. 108; and manufactured in our state-of-the-art ISO 9002 and QS 9000 quality certified factory. All CG lighting products are designed using CAD/CAM computerized equipment and these modern designs are then tested using 3-dimensional testing machine to insure precision and accuracy in the research, development and design of their molds.

In order to affirm resilience and durability, they rigorously test every CG lighting product in a Thermo-Hygrometer (temperature and humidity chamber) and a Rain-Resistant Tester. In addition , they thoroughly expose all of their products to intense photometric testing to assure strict compliance with local, state, federal and international standards. All CG products go through strict testing for durability, impact strength, as well as fresh/salt water, dust/dirt resistance.

In order to comply with safety regulations, all CG products must pass all quality inspections. After all safety checks and quality assurance, products are manufactured using the most advanced technological and economical methods available. Single, double, and triple shot injection machines produce our semi-finished products. After undergoing vacuum electro-plating or spray plating processes, products are combined through hot press bonding, friction bonding, or an automatic assembly line spin coater.

Contact our Tech Support Line for further information at 928-855-6341. Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Headlight Set with Corner Lights

2001-2004 Tacoma

CG is the answer for all of your performance lighting needs. With over 30 years of manufacturing experience, they surpass all competition in quality, innovative styling and product offerings. We at LCE are dedicated to providing great service and superior customer support through an experienced sales team and a knowledgeable technical staff.

LCE offers the best quality performance lighting products at an affordable cost. All CG products are SAE and D.O.T. compliant to FMVSS No. 108; and manufactured in our state-of-the-art ISO 9002 and QS 9000 quality certified factory. All CG lighting products are designed using CAD/CAM computerized equipment and these modern designs are then tested using 3-dimensional testing machine to insure precision and accuracy in the research, development and design of their molds.

In order to affirm resilience and durability, they rigorously test every CG lighting product in a Thermo-Hygrometer (temperature and humidity chamber) and a Rain-Resistant Tester. In addition , they thoroughly expose all of their products to intense photometric testing to assure strict compliance with local, state, federal and international standards. All CG products go through strict testing for durability, impact strength, as well as fresh/salt water, dust/dirt resistance.

In order to comply with safety regulations, all CG products must pass all quality inspections. After all safety checks and quality assurance, products are manufactured using the most advanced technological and economical methods available. Single, double, and triple shot injection machines produce our semi-finished products. After undergoing vacuum electro-plating or spray plating processes, products are combined through hot press bonding, friction bonding, or an automatic assembly line spin coater.

Contact our Tech Support Line for further information at 928-855-6341. Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

(1)

Black Headlight Set

2005-2011 Tacoma

CG is the answer for all of your performance lighting needs. With over 30 years of manufacturing experience, they surpass all competition in quality, innovative styling and product offerings. We at LCE are dedicated to providing great service and superior customer support through an experienced sales team and a knowledgeable technical staff.

LCE offers the best quality performance lighting products at an affordable cost. All CG products are SAE and D.O.T. compliant to FMVSS No. 108; and manufactured in our state-of-the-art ISO 9002 and QS 9000 quality certified factory. All CG lighting products are designed using CAD/CAM computerized equipment and these modern designs are then tested using 3-dimensional testing machine to insure precision and accuracy in the research, development and design of their molds.

In order to affirm resilience and durability, they rigorously test every CG lighting product in a Thermo-Hygrometer (temperature and humidity chamber) and a Rain-Resistant Tester. In addition , they thoroughly expose all of their products to intense photometric testing to assure strict compliance with local, state, federal and international standards. All CG products go through strict testing for durability, impact strength, as well as fresh/salt water, dust/dirt resistance.

In order to comply with safety regulations, all CG products must pass all quality inspections. After all safety checks and quality assurance, products are manufactured using the most advanced technological and economical methods available. Single, double, and triple shot injection machines produce our semi-finished products. After undergoing vacuum electro-plating or spray plating processes, products are combined through hot press bonding, friction bonding, or an automatic assembly line spin coater.

Contact our Tech Support Line for further information at 928-855-6341. Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Black Headlight Set LED Projector with Halo (CCFL)

2005-2011 Tacoma

CG is the answer for all of your performance lighting needs. With over 30 years of manufacturing experience, they surpass all competition in quality, innovative styling and product offerings. We at LCE are dedicated to providing great service and superior customer support through an experienced sales team and a knowledgeable technical staff.

LCE offers the best quality performance lighting products at an affordable cost. All CG products are SAE and D.O.T. compliant to FMVSS No. 108; and manufactured in our state-of-the-art ISO 9002 and QS 9000 quality certified factory. All CG lighting products are designed using CAD/CAM computerized equipment and these modern designs are then tested using 3-dimensional testing machine to insure precision and accuracy in the research, development and design of their molds.

In order to affirm resilience and durability, they rigorously test every CG lighting product in a Thermo-Hygrometer (temperature and humidity chamber) and a Rain-Resistant Tester. In addition , they thoroughly expose all of their products to intense photometric testing to assure strict compliance with local, state, federal and international standards. All CG products go through strict testing for durability, impact strength, as well as fresh/salt water, dust/dirt resistance.

In order to comply with safety regulations, all CG products must pass all quality inspections. After all safety checks and quality assurance, products are manufactured using the most advanced technological and economical methods available. Single, double, and triple shot injection machines produce our semi-finished products. After undergoing vacuum electro-plating or spray plating processes, products are combined through hot press bonding, friction bonding, or an automatic assembly line spin coater.

Contact our Tech Support Line for further information at 928-855-6341. Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

(1)

Chrome Headlight Set LED Projector with Halo (CCFL)

2005-2011 Tacoma

CG is the answer for all of your performance lighting needs. With over 30 years of manufacturing experience, they surpass all competition in quality, innovative styling and product offerings. We at LCE are dedicated to providing great service and superior customer support through an experienced sales team and a knowledgeable technical staff.

LCE offers the best quality performance lighting products at an affordable cost. All CG products are SAE and D.O.T. compliant to FMVSS No. 108; and manufactured in our state-of-the-art ISO 9002 and QS 9000 quality certified factory. All CG lighting products are designed using CAD/CAM computerized equipment and these modern designs are then tested using 3-dimensional testing machine to insure precision and accuracy in the research, development and design of their molds.

In order to affirm resilience and durability, they rigorously test every CG lighting product in a Thermo-Hygrometer (temperature and humidity chamber) and a Rain-Resistant Tester. In addition , they thoroughly expose all of their products to intense photometric testing to assure strict compliance with local, state, federal and international standards. All CG products go through strict testing for durability, impact strength, as well as fresh/salt water, dust/dirt resistance.

In order to comply with safety regulations, all CG products must pass all quality inspections. After all safety checks and quality assurance, products are manufactured using the most advanced technological and economical methods available. Single, double, and triple shot injection machines produce our semi-finished products. After undergoing vacuum electro-plating or spray plating processes, products are combined through hot press bonding, friction bonding, or an automatic assembly line spin coater.

Contact our Tech Support Line for further information at 928-855-6341. Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Chrome Projector Headlight Set with Halo (CCFL)

2007-2013 Tundra/Sequoia

CG is the answer for all of your performance lighting needs. With over 30 years of manufacturing experience, they surpass all competition in quality, innovative styling and product offerings. We at LCE are dedicated to providing great service and superior customer support through an experienced sales team and a knowledgeable technical staff.

LCE offers the best quality performance lighting products at an affordable cost. All CG products are SAE and D.O.T. compliant to FMVSS No. 108; and manufactured in our state-of-the-art ISO 9002 and QS 9000 quality certified factory. All CG lighting products are designed using CAD/CAM computerized equipment and these modern designs are then tested using 3-dimensional testing machine to insure precision and accuracy in the research, development and design of their molds.

In order to affirm resilience and durability, they rigorously test every CG lighting product in a Thermo-Hygrometer (temperature and humidity chamber) and a Rain-Resistant Tester. In addition , they thoroughly expose all of their products to intense photometric testing to assure strict compliance with local, state, federal and international standards. All CG products go through strict testing for durability, impact strength, as well as fresh/salt water, dust/dirt resistance.

In order to comply with safety regulations, all CG products must pass all quality inspections. After all safety checks and quality assurance, products are manufactured using the most advanced technological and economical methods available. Single, double, and triple shot injection machines produce our semi-finished products. After undergoing vacuum electro-plating or spray plating processes, products are combined through hot press bonding, friction bonding, or an automatic assembly line spin coater.

Contact our Tech Support Line for further information at 928-855-6341. Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Black Projector Headlight Set with Halo (CCFL)

2007-2013 Tundra/Sequoia

CG is the answer for all of your performance lighting needs. With over 30 years of manufacturing experience, they surpass all competition in quality, innovative styling and product offerings. We at LCE are dedicated to providing great service and superior customer support through an experienced sales team and a knowledgeable technical staff.

LCE offers the best quality performance lighting products at an affordable cost. All CG products are SAE and D.O.T. compliant to FMVSS No. 108; and manufactured in our state-of-the-art ISO 9002 and QS 9000 quality certified factory. All CG lighting products are designed using CAD/CAM computerized equipment and these modern designs are then tested using 3-dimensional testing machine to insure precision and accuracy in the research, development and design of their molds.

In order to affirm resilience and durability, they rigorously test every CG lighting product in a Thermo-Hygrometer (temperature and humidity chamber) and a Rain-Resistant Tester. In addition , they thoroughly expose all of their products to intense photometric testing to assure strict compliance with local, state, federal and international standards. All CG products go through strict testing for durability, impact strength, as well as fresh/salt water, dust/dirt resistance.

In order to comply with safety regulations, all CG products must pass all quality inspections. After all safety checks and quality assurance, products are manufactured using the most advanced technological and economical methods available. Single, double, and triple shot injection machines produce our semi-finished products. After undergoing vacuum electro-plating or spray plating processes, products are combined through hot press bonding, friction bonding, or an automatic assembly line spin coater.

Contact our Tech Support Line for further information at 928-855-6341. Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!