This rear bumper is one of the first in the industry that’s constructed of 100%, 1035 DOM tubing and a 2" receiver built into it. The 1.75" OD X .120" wall thick DOM tubing will give you all the protection your pickup needs, while playing on the rocks.
NOTE: Flat rate shipping for the bumper is only $150.00 (Continental United States only). Bumper is shipped unpainted and lightly oiled to prevent rusting during shipping. Bumper is not rated for towing, or recovery. Optional Rear Bumper to Frame Support Kit for 4Runners, see Part #: 3032410.
Contact our Tech Support Line for further information at 928-855-6341.
To open a printable PDF version of this instruction CLICK HERE
Installation Note: Make sure bumper has been cleaned and oil is removed so the bumper can be painted before installation.
1. Align bumper with rear of truck. Make sure you have all the necessary hardware nearby.
2. Slide bumper into factory mounting holes in the frame rail.
3. Put provided washers on bolts and slide bolts through aligned holes. Leave bolts loose so bumper can be adjusted.
4. Adjust bumper so it is even and tighten the bolts.
Installed Photos