Oil Drain Line
(Stainless Steel Braided)
Looking for a better oil drain line for your turbo? Look no further, LC Engineering has everything you need. This particular line was designed for our Turbo kits but it could be used for just about any...
Pro Connecting Rod Bolt
To eliminate the chance of rod failure when building your motor, we highly suggest replacing the stock rod bolts. A continuous high rpm, the stock bolts will stretch, and rod bearing or rod failure occurs. These Pro Rod Bolts...
2" Turbo J-Bend / Intercooler
(Mild Steel)
LC Engineering has all the intercooler pieces to finish off that turbo project. LC Engineering can build a custom intercooler no matter what your needs are.
Contact our Tech Support Line for further...
Oil Pump Drive Spline
(Dual Row)
If you're replacing the single timing chain on your early Toyota motor (83-84) with the more desirable dual-row chain, you will need a dual row drive spline to make it all work right.
OEM Toyota Part #:...
Adjustable Timing Tag
(Underdrive)
Set your ignition timing exactly with the adjustable timing tag. Designed to work with our 4" crank pulleys. Set the tag one time at TDC and then time your motor with 100% accuracy. No guesswork!
NOTE: To achieve...
GT25 / GT28 Discharge Flange
(5-Bolt Deep)
New part, text coming soon. Call the sales desk for more information.
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images are for illustration purposes only...
Safety Auto Main Bearing Set
Offset/Center locating tabs
When overhauling/rebuilding an engine, it is highly recommended that you replace all bearings in the bottom end.These bearing sets will get your engine back to the proper specification and ready...
Oil Feed Line
(Stainless Steel Braided)
Looking for a better oil feed line for your turbo? Look no further, LC Engineering has everything you need. This particular line was designed for our Turbo kits but it could be used for just about any application...
Gasket Set
(Timing Chain Cover)
High-quality timing cover gasket set for the early (75-84) 20R/22R engines. These do not fit late (85-95) blocks.
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images are for...
Timing Chain Tensioner
Need to replace your chain tensioner and don't need the entire kit? LCE has you covered!
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images are for illustration purposes only...
Supercharger Belt
Replacement 4-rib supercharger belt for the 22R/RE supercharger kits.
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images are for illustration purposes only. Images may not represent the...
Rod Bearing Set
(Pro Journal)
Some of the most common questions we get at LC engineering are: What is a Pro Journal? Is it better than a Toyota Journal? What bearings do I need? Well, let's try to clear the issue up a bit. During the R&D process on...