Tacoma

Fuel Pressure Gauge Kit Ever wonder if the fuel regulator is doing its job? Not sure if you're getting the right fuel pressure at the fuel rail? The new 95-04 2RZ/3RZ fuel gauge kit is the answer to those questions. This kit comes with everything you...

Street Tune-up Kit A tune up kit that won't break the bank, for your 3.4L 5VZ from LC Engineering. Refresh that ignition system on your engine by replacing a couple of the most important and expensive parts of it. Stock Replacement. Kit...

Supercharger Pulley (58mm / High Boost) Replacement supercharger pulley for the Toyota 2RZ 2.4L or 3RZ 2.7L High Boost Supercharger kits. This pulley may over-rev the blower speed on high RPM running. NOTE: This pulley requires the use of our 5th...

Supercharger Pulley (70mm / Smog Legal) Our 3RZ smog-legal superchargers feature a smaller 70mm pulley to reduce the boost down to approx. 4.5 psi. This pulley size is required for CARB exemption (smog legal) on 95-01 3RZ 2.7L Superchargers...

Supercharger Pulley (73mm / Smog Legal) Our 2RZ smog-legal superchargers feature a smaller 73mm pulley to reduce the boost down to approx. 4.5 psi. This pulley size is required for CARB exemption (smog legal) on 95-01 2RZ Toyota's. NOTE: For a...

2RZ / 3RZ Modified EGR Tube (1995-2004 / Anderson Engineering) The EGR extension will be welded in place to allow for OEM EGR system to operator as normal. The tube used is 0.750" OD with a wall thickness of 0.062" (Stainless Steel 304) to offer...

Differential Armor (Weld On) Protect your differential gears from unnecessary damage. Trail-Gear now offers weld on differential Armor for 1995-2004 Toyota Tacoma, and 2000-2013 Toyota Tundra. Precision Laser Cut from 1/4" A36 Steel, then CNC formed to...

Main Bolt Set Time to replace those main bolts while rebuilding your bottom end? No problem, we have you covered, order this complete set of (8) main bolts. Contact our Tech Support Line for further information at 928-575-2174. Note:...

ITM Head Gasket Set LC Engineering has several performance head gasket sets available for you, depending on the application. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes...

Firewall Kit When doing a solid axle conversion on a Tacoma, you are required to remove the OEM rack and pinion steering system, which leaves a large hole in your firewall. Our Tacoma firewall plate fills that hole and bolts into the OEM fastener...

S&B Intake Replacement Filter (KF-1011) This is a replacement filter made for S&B's CAI for 1999-2003 Tacomas and 4Runners. Measurements are provided in case it may fit your custom application. S&B's filters are made with silicone in all...

Front Top Plate Spacer Kit Looking for something to get a little bit bigger tire under that rig of yours? A spacer is just the item needed to get the job done. Providing an additional 1/2" - 3/4" of lift to the front will keep those tires from rubbing...